Abstract:Elastohydrodynamic lubrication (EHL) is a common mode of fluid-film lubrication in which many machine elements operate. Its thermal behavior is an important concern especially for components working under extreme conditions such as high speeds, heavy loads, and surfaces with significant roughness. Previous thermal EHL (TEHL) studies focused only on the cases with smooth surfaces under the full-film lubrication condition. The present study intends to develop a more realistic unified TEHL model for point contact problems that is capable of simulating the entire transition of lubrication status from the full-film and mixed lubrication all the way down to boundary lubrication with real machined roughness. The model consists of the generalized Reynolds equation, elasticity equation, film thickness equation, and those for lubricant rheology in combination with the energy equation for the lubricant film and the surface temperature equations. The solution algorithms based on the improved semi-system approach have demonstrated a good ability to achieve stable solutions with fast convergence under severe operating conditions. Lubricant film thickness variation and temperature rises in the lubricant film and on the surfaces during the entire transition have been investigated. It appears that this model can be used to predict mixed TEHL characteristics in a wide range of operating conditions with or without three-dimensional (3D) surface roughness involved. Therefore, it can be employed as a useful tool in engineering analyses.

EHL Performance of the Lubricant with Shear Strength: Part I — Boundary Slippage and Film Failure

A Lubrication Deviation From the Classical EHL Theory by the Lubricant Viscoplasticity: Part I - Film Thickness Dependence

About the Load-Carrying Capacity of Elastohydrodynamic Lubrication Film

EHL Properties of Roller Contacts and Its Application Part Ⅱ: A Numerical Analysis of EHL for Engineering Logarithmic Roller

A Lubrication Deviation from the Classical EHL Theory by the Lubricant Viscoplasticity: Part II — Boundary of Lubrication Regimes

EHL Film Thickness Limitation Theory Under a Limiting Shear Stress

Influence of wall slip of lubricants on performance of elastohydrodynamic lubrication in line contact

Slip Status in Lubricated Point-Contact Based on Layered Oil Slip Lubrication Model

An Analysis of Elastohydrodynamic Lubrication with Limiting Shear Stress: Part I—Theory and Solutions

Analysis of Power Law Fluid Thermal Elastohydrodynamic Lubrication

Influence of Thermal Effects on Elastohydrodynamic (EHD) Lubrication Behavior at High Speeds

Effects of Rheological Model on Elastohydrodynamic Film Thickness for Shear--thinning Lubricants

On the Theory of Thermal Elastohydrodynamic Lubrication at High Slide-Roll Ratios—Circular Glass-Steel Contact Solution at Opposite Sliding

Experimental Study of the Interfacial Slip on Hydrodynamic Lubrication Under Different Wettabilities

Effects of boundary slips on thermal elastohydrodynamic lubrication under pure rolling and opposite sliding contacts

Analysis of the thermal elastohydrodynamic lubrication of a finite line contact

Analysis of Line Contact Elastohydrodynamic Lubrication with the Particles under Rough Contact Surface

Numerical Solution of Mixed Thermal Elastohydrodynamic Lubrication in Point Contacts with Three-Dimensional Surface Roughness

Mixed EHL Problems: an Efficient Solution to the Fluid–Solid Coupling Problem with Consideration of Elastic Deformation and Cavitation

EHL Film Formation under Zero Entrainment Velocity Condition

Theoretical Study on the Lubrication Failure for the Lubricants with a Limiting Shear Stress