Abstract:Purpose The purpose of this study is to investigate the influence of surface texture on the subsurface characteristics of contact interfaces under elastohydrodynamic lubrication condition. As a typical contact form of gears and bearings, the optimization of friction characteristics at the elastohydrodynamic lubrication (EHL) interface has attracted the attention of scholars. Laser surface texturing is a feasible optimization solution, but there have been concerns about whether the surface texture of high-pair parts will affect their fatigue life. Design/methodology/approach To examine the impact of texture preparation on the subsurface characteristics of high-pair interfaces under EHL conditions, a point contact EHL model is developed that takes into account the effect of textured surface topography. The pressure and thickness of the oil film are calculated as input parameters under different loads and entrainment velocities. The finite element method is used to simulate the impact of textures with varying diameters, densities and depths on the subsurface characteristics of the elastohydrodynamic interface. According to ISO 25178, analyze the relationship between 3D topography parameters and subsurface characteristics and study the trend of friction characteristics and subsurface characteristics based on the results of the ball on disc friction tests. Findings The outcomes suggest that under different rotational velocity and load conditions, the textured surfaces exhibit improved friction reduction effects; however, the creation of textures can result in significant subsurface plastic deformation and local peeling. The existence of texture makes the larger stress zone in the subsurface layer closer to the surface, leading to fatigue failure near the surface. Reasonable design parameters can help enhance the attributes of the subsurface. A smaller Sa and a Str greater than 0.5 can achieve ideal subsurface properties on the textured surface. Originality/value This paper investigates the influence of surface texture on the friction and subsurface characteristics of EHL interfaces and analyzes the impact of surface texture on interface contact performance while achieving lubrication improvement functional characteristics. The results provide theoretical support for the optimization design and functional regulation of surface texture in EHL interfaces. Peer review The peer review history for this article is https://publons.com/publon/10.1108/ILT-10-2023-0324/

Effects of Rough Surface Topography and Orientation on the Characteristics of EHD and Mixed Lubrication in Both Circular and Elliptical Contacts

Effect of Roughness Orientation on the Elastohydrodynamic Lubrication Film Thickness

Mixed Elastohydrodynamic Lubrication in Finite Roller Contacts Involving Realistic Geometry and Surface Roughness

Influence of Surface Roughness on the Lubricating Behavior of Elliptic EHL Contacts under Thermal Non-Newtonian Conditions

Micro-Elastohydrodynamics Lubrication of Point Contacts with Coexistence of Longitudinal and Transverse Roughness

Analysis on the mixed lubrication performance of finite line contact

Investigation of Normal Dynamic Contact Stiffness and Damping Characteristics in Mixed Lubrication for Non-Gaussian Rough Surfaces

Effects of Texture Orientation on the Mixed Thermal Elastohydrodynamic Lubrication and Fatigue Life in Point Contacts

The Influence of Surface Topography on Mixed Plasto-Elastohydrodynamic Lubrication in Point Contacts

Normal and Tangential Contact Models for Mixed Lubrication of Mechanical Interface

Influence of Two-Sided Surface Waviness on the EHL Behavior of Rolling/Sliding Point Contacts under Thermal and Non-Newtonian Conditions

A Mixed Elastohydrodynamic Lubrication Model With Asperity Contact

A Mixed Elasto-Hydrodynamic Lubrication Model for Studying Tribological Properties of Rough Surfaces

Study on the subsurface characteristics of textured surfaces under EHL condition

The Relationship Between Friction and Film Thickness in EHD Point Contacts in the Presence of Longitudinal Roughness

Thermal mixed elastohydrodynamic lubrication modeling and analysis of the lubricated non-conformal contacts with non-Gaussian surface roughness and coating

A Full Numerical Solution to the Mixed Lubrication in Point Contacts

Analysis of Line Contact Elastohydrodynamic Lubrication with the Particles under Rough Contact Surface

Surface Roughness Effects on Point Contact Elastohydrodynamic Lubrication in Linear Rolling Guide with Fractal Surface Topographies

Numerical Solution of Mixed Thermal Elastohydrodynamic Lubrication in Point Contacts with Three-Dimensional Surface Roughness

Transition of frictional states and surface roughness effects in lubricated contacts