Abstract:Aqueous solutions of water and ethylene glycol (EG) are prevalently employed in braking, heat transfer, and lubrication systems. However, the precise mechanism through which water content affects the lubricative attributes of EG solutions remains elusive. This research systematically examines the tribological characteristics of EG solutions at varying concentrations using a ceramic–TiAlN friction-pair system. As the concentration of EG increases, the sequential transformation of the associated molecular complex structure in the lubricating medium can be described as follows: [H2O]m·EG → [H2O]m·[EG]n → H2O·[EG]n. Among them, the stoichiometric coefficients “m” and “n” are the simplest mole ratio of H2O and EG in the molecular complex structure, respectively. The most favorable EG concentration was determined to be 50 wt.%. At this concentration, a flexible molecular complex adsorption structure ([H2O]m·[EG]n) with a significant bearing capacity (due to intense hydrogen bonding) forms on the surface of the friction pair, which results in a reduction in the running-in duration and facilitates the achievement of superlubricity, and the coefficient of friction (COF) is about 0.0047. Solutions containing 50 wt.% EG enhance the load-bearing ability and hydrophilicity of the lubricating medium. Moreover, they minimize the roughness of the worn region and curtail the adhesive forces and shear stress at the frictional interface, enabling the realization of superlubricity. Consequently, this research offers valuable insights into the optimal water-to-EG ratio, revealing the mechanism of a superlubricity system that possesses exceptional tribological attributes and holds significant potential for practical applications.

Superlubricity in EHL Contacts with Water-Containing Gear Fluids

Minimizing gear friction with water-containing gear fluids

Bearing Power Losses with Water-Containing Gear Fluids

Friction assessment of ultralow viscosity lubricant formulations based on a validated elastohydrodynamic simulation

Impact of Water Content on the Superlubricity of Ethylene Glycol Solutions

EHL Performance of the Lubricant with Shear Strength: Part I — Boundary Slippage and Film Failure

Investigation of Superlubricity Achieved by Polyalkylene Glycol Aqueous Solutions

Influence of Thermal Effects on Elastohydrodynamic (EHD) Lubrication Behavior at High Speeds

Superlubrication obtained with mixtures of hydrated ions and polyethylene glycol solutions in the mixed and hydrodynamic lubrication regimes

Investigations on Ways to Improve the Scuffing and Wear Behavior of Oil-Free Water-Based Lubricants for Gear Applications

Experimental Investigation of Lubrication Properties at High Contact Pressure

DLC and Glycerol: Superlubricity in Rolling/Sliding Elastohydrodynamic Lubrication

Significantly Reducing Friction and Wear of Water‐Based Fluids with Shear Thinning Bicomponent Supramolecular Hydrogels

Friction and Temperature Behavior of Lubricated Thermoplastic Polymer Contacts

Elastohydrodynamic Traction and Film Thickness at High Speeds

Molecular Behaviors in Thin Film Lubrication—part Three: Superlubricity Attained by Polar and Nonpolar Molecules

Robust and universal macroscale superlubricity with natural phytic acid solutions

Achieving Macroscale Liquid Superlubricity Using Lubricant Mixtures of Glycerol and Propanediol

Macroscale Superlubricity with Ultralow Wear and Ultrashort Running-In Period (∼1 s) through Phytic Acid-Based Complex Green Liquid Lubricants

Lubricating Properties of Polyalkylene Glycol and Organic Phosphate Ester Mixed Aqueous Solutions

Superlubricity: Investigation of Superlubricity Achieved by Polyalkylene Glycol Aqueous Solutions (Adv. Mater. Interfaces 19/2016)