Abstract:The thermohydrodynamic analysis of oil film bearing is essential for high speed oil film bearing. The temperature field is coupled with the pressure field. The numerical model can be built or chosen according to the complexity of the objects and requirement of the accuracy. In this paper, four pressure-thermal (P-T) models are proposed, which are zero-dimensional temperature field coupled with Reynolds equation (OD P-T model), two-dimensional temperature field coupled with Reynolds equation (2D P-T model), two-dimensional temperature with third dimensional correction coupled with Dawson equation (2sD P-T model), three-dimensional temperature field coupled with Dawson equation (3D P-T model). The non-Newtonian and temperature-viscosity effects of the lubrication oil are considered in all the four models. Two types of cylindrical journal bearing, the bearing with/without axial grooves, are applied for the simulation. All the simulated cases are compared with the solutions of the CFX. The results show that the OD P-T model fails to predict the behavior of high speed bearing; The 2D and 2sD P-T model have an acceptable accuracy to predict the performance of the bearing without grooves, but are not able to simulate the P-T field of the bearing with grooves because of the under-developed thermal boundary layer; The 2sD P-T model shows a great improvement when calculating the pressure field compared with the 2D P-T model; the 3D P-T model coincides well with the CFX at any condition. The comparison of these four models provides a reference to help designer choose a proper numerical model for a certain project.

The Non‐newtonian Effect of Temperature on Hydrodynamic Lubrication Failure

A Thermal Equilibrium Analysis of Line Contact Hydrodynamic Lubrication Considering the Influences of Reynolds Number, Load and Temperature

Effects of Lubricant Viscosity-Temperature Relationship on the Capacity of Sliding Bearing

Analysis on the oil film uniformity of hydro-viscous drive friction pairs

Effect of the Characteristics of Lubricant Moleculeson on the Failure of Nano-Fluid Films

The Failure of Fluid Film at Nano-Scale

Experimental and Numerical Study of the Influence of Loading Direction on the Lubrication and Cooling of Self-Circulating Oil Bearing System Applied in Internal Gear Pumps

Theoretical Study on the Lubrication Failure for the Lubricants with a Limiting Shear Stress

Frequency-Domain Analysis of Non-Newtonian Fluid Behavior in Head-Disk Interface Lubrication

Combined Effects of Coriolis Force and Temperature-Viscosity Dependency on Hydro-Viscous Transmission of Rotating Parallel Disks

About the Load-Carrying Capacity of Elastohydrodynamic Lubrication Film

Frequency-domain Analysis of Rheological Properties of Viscoelastic Non-Newtonian Medium

Modified Reynolds Equation for Non-Newtonian Fluid with Rheological Model in Frequency Domain

Effects of Water Contamination on Thermal Elastohydrodynamic Lubrication of Journal Bearing

Numerical Analysis on the Effect of Transverse Surface Roughness in Non-Newtonian Fluid Lubrication

Numerical Analysis on Effect of Regular Surface Topography in Non-Newtonian Fluid Lubrication

The Comparison Of Four Pressure-Thermal Models Of Oil Film Bearing With The Non-Newtonian And Temperature-Viscosity Effects

Calculated Journal Bearing Lubrication of Non-Newtonian Medium with Surface Roughness Effects

EHL Performance of the Lubricant with Shear Strength: Part I — Boundary Slippage and Film Failure

Influence of Thermal Effects on Elastohydrodynamic (EHD) Lubrication Behavior at High Speeds

Thermohydrodynamic Analysis of Journal Bearings Lubricated with Couple Stress Fluids