Abstract:In this study, K 2 TiF 6 and C powder (Ti:C atomic ratio 1:1) are introduced into Al-Si-Fe alloy by contact reaction method. The focus of this study is to investigate the reaction and precipitation behavior of Ti source in the alloy melt, and the effect of reaction products on the microstructure and properties of Al-Si-Fe alloy. The results show that the reaction products formed between Ti and the matrix alloy can destroy the acicular β-Fe phase in the original alloy. The transformation results in the a morphological change of the alloy from needle-like structure to Chinese script and fishbone-like structure, which effectively improves the mechanical properties of the alloy. The DSC analysis results indicate that Al-Si- Fe powder, K 2 TiF 6 powder, and C powder undergo significant exothermic reactions at around 950 °C, corresponding to the formation of TiC. Further microscopic morphology observations support the inference that TiC powders formed in this temperature range. Firstly, the synthesis of the matrix takes place at 580 °C. K 2 TiF 6 mixed with alloy powder shows an obvious exothermic peak at 660 °C, corresponding to the formation of the second phase Al 3 Ti by wetting and chemical reaction. However, it is worth noting that the reaction intermediate product(Al 4 C 3 phase) consumes three times as much Al 3 Ti as itself. As a result, the exothermic peak generated by Al 3 Ti disappears. Lastly, a long-term exothermic reaction that takes place above 850 °C lead to the gradual replacement of the Al 3 Ti phase by TiC particles. The mechanical properties test indicates that the needle-shaped Al 3 Ti to some extent deteriorates the alloy's properties. But the final product (TiC) can offset the deteriorating effect of Al 3 Ti and restore the alloy's property.

Phase Assembly of Ti<sub>2</sub>SnC Powders

Phase Assembly of Ti2SnC Powders

Low-temperature instability of Ti2SnC: A combined transmission electron microscopy, differential scanning calorimetry, and x-ray diffraction investigations

Preparation of Ti2SnC by Solid—liquid Reaction Synthesis and Simultaneous Densification Method

Effect of Sn and Si on the Synthesis of Ti<sub>3</sub>Al(Sn/Si)C<sub>2</sub> by Self-Propagating High-Temperature Sintering

Synthesis of Ti(C,N) Powder Via CRN Method from Rutile/Carbon Mixtures

Formation Mechanism of Spherical TiC in Ni-Ti-C System during Combustion Synthesis

Reaction Mechanism of Ti<SUB>3</SUB>SiC<SUB>2</SUB> Formed on the Diamond

A Study on Formation of Ti3sic2 Synthesized by Elemental Powders

Ti2SnC MAX Phase Directly Synthesized by High-Temperature Ball Milling

Synthesis of Ti3sic2 by Pressureless Sintering of the Elemental Powders in Vacuum

Reaction mechanism of Ti3SiC2 formed on the diamond

Formation of M N +1 AX N Phases in Ti–Cr–Al–C Systems by Self-Propagating High-Temperature Synthesis

A possible mechanism on synthesis of Ti3AlC2

Preparation and Sinterability of Submicron Titanium Carbide Powders Synthesized with Phenolic Resin As Carbon Source by Carbothermal Reduction

Preparation and characterization of Ti3SiC2 powder

Mechanosynthesis Mechanism of Tic Powders

Phase Formation Route of Cr2alc Ceramics from Cr, Al and Graphite Powders

Synthesis Of High-Purity Powder Ti3alc2 Materials By Pressureless Sintering

Phase Stability, Electronic Structure, Compressibility, Elastic and Optical Properties of A Newly Discovered Ti3snc2: A First-Principle Study

Thermodynamic Investigation on K2TiF6 and C Powder to Prepared in-situ TiCp in Molten Al-Si-Fe Alloy

Phase Assembly of Ti&lt;sub&gt;2&lt;/sub&gt;SnC Powders