Abstract:The mechanical interaction between welded panel and fixture has a remarkable influence on the distribution of weld induced residual stress and distortion.Unfortunately,the influence of fixture is not generally included in conventional numerical simulations of welding process.In the present study,it is proposed that the numerical models in which the mechanical interaction between welded panel and fixture is considered as contact pair in the finite element analysis(FEA) of welding process.This could make the FEA of welding process more scientific and accurate.The fixture constraint plays an important role in accurate modeling of welding process.In the simulations,various mechanical constraint boundary conditions in welding process were thought about to establish the relationships of the normal and tangential mechanical interactions between welded panel and fixture. In Free model,the fixture restraint was not considered.In Mech model,the displacements of nodes where welded panel contacted with fixture were restricted in x,y,z directions.Hard model and Tabular model were contact models which included the fixture.In the normal direction,once welded panel and fixture were in contact,the transmitted contact pressure could be infinite in Hard model.While data pairs of contact pressure vs over-closure or clearance were specified to define a piecewise-linear relationship in the normal direction in Tabular model.A penalty friction coefficient of 0.3 was applied in tangential direction in both Hard and Tabular models.Fixture and welded panel were separated and the contact relationships were removed after the welding process in both Hard and Tabular models. The simulation results of contact models including fixture were more accurate,compared to models containing only welded panel with rigid restrictions.The distortion mode of welded panels under different fixture constraint conditions corresponded well with experimental results.The differences between the distributions of transverse stresses on top and bottom surfaces of welded panel at the beginning of welding process had a crucial influence on the distortion mode of welded panel.

Finite Element Analysis of Welding Distortion in a Large Thin-plate Panel Structure

Investigating Welding Distortion of Thin-Plate Stiffened Panel Steel Structures by Means of Thermal Elastic Plastic Finite Element Method

Theoretical Prediction of Welding Distortion Considering Positioning And the Gap Between Parts

Numerical Prediction and Control of Deformation and Residual Stress in Double-Sided Arc Welding of Large Pressure Hull

Influence of Initial Structural Dimensions of Plates on Welding Distortion

Prediction of Double-Sided Arc Welding Deformation Based on Dynamic Heat Distribution Model and TEP-FE Approach

Study on FEM Numerical Simulation Method for the Welding Distortion

Prediction of distortion in a thin-plate structure with intermittent fillet joints using a local-to-global approach

Reverse Deformation Design for Bending Control in Welding of Ring Stiffeners

Finite Element Method Simulation for Residual Stress in Quenched Aluminum Alloy Thick-Plate and Its Effect on Machining Distortion

Simulation and prediction for welding deformation on welding procedure of hand pallet truck

Review on finite element analysis of welding deformation and residual stress

Welding Distortion Prediction and Mitigation in Thick Steel Plate Structures on Ships

Nonlinear Computational Welding Mechanics for Large Structures

The Influence of Welding Mechanical Boundary Condition on the Residual Stress and Distortion of a Stiffened-Panel

Welding Deformation Predictions of Thin-Wall Cylinders Using a Local-Global Method

The Influence of Pre-existing Deformation on GMA Welding Distortion in Thin Steel Plates

Thermal-Elastic-Plastic Finite Element Analysis for Laser Welding Deformation of Thin Plate

Prediction of Welding Deformation of Automotive Components Using Large-scale Thermal Elastic Plastic Analysis

ESTABLISHMENT AND APPLICATION OF FIXTURE CONSTRAINT MODELS IN FINITE ELEMENT ANALYSIS OF WELDING PROCESS

Dimensional precision controlling on out-of-plane welding distortion of major structures in fabrication of ultra large container ship with 20000TEU