Abstract:Long computational time for thermo-mechanical simulation of welding distortion and residual stresses hinders the application of this technique in large welded structure.It is of urgent need to develop a high efficiency numerical simulation strategy for welding process.The traveling temperature function method,in which the quasi-steady state character of welding process was exploited,was applied in the present study to improve the efficiency of welding simulation.Also the temperature and temperature history dependent material property models were established and applied.The finite elements analysis(FEA) models of 4 types of cylindrical and conical aluminum alloy structures,with different geometric shapes and dimensions,were built to analyze.Traditional moving heat source models were also established for these 4 structures to compare with the traveling temperature function method.The welding induced distortions were predicted by both methods for all the structures.The time cost of the traveling temperature function method is less than 40%of that of the traditional moving heat source method.While the computed distortion trends and values of two simulation methods were consistent.Finally the validation experiments were carried out and the distortions were measured.The measured distortions were compared with the numerical simulation results of two methods.The comparison show goods agreement.The errors between computed results from the two methods and the experimental results are no more than 10%for all types of structures. This indicates that the numerical simulation models are not only highly efficient,but also suitable for different types of cylindrical and conical aluminum alloy structures.So the traveling temperature function method is a high efficiency numerical simulation method with abroad applicability.This is a beneficial attempt and a novel idea to driving numerical simulation method in application of the large welded structures.

Welding Deformation Predictions of Thin-Wall Cylinders Using a Local-Global Method

Numerical Prediction and Control of Deformation and Residual Stress in Double-Sided Arc Welding of Large Pressure Hull

Welding Sequence in Large Thin-Walled Structures by Means of Local-Global and Welding Macro Element

Simulation and prediction for welding deformation on welding procedure of hand pallet truck

Prediction of Double-Sided Arc Welding Deformation Based on Dynamic Heat Distribution Model and TEP-FE Approach

Prediction of distortion in a thin-plate structure with intermittent fillet joints using a local-to-global approach

Reverse Deformation Design for Bending Control in Welding of Ring Stiffeners

Investigating Welding Distortion of Thin-Plate Stiffened Panel Steel Structures by Means of Thermal Elastic Plastic Finite Element Method

Research Of Weld On Axial Buckling Stress Of Multilayer Combined Cylindrical Shells

Effect of Local Geometric Imperfections on Axial Buckling of Welded Steel Tanks

Influence of Initial Structural Dimensions of Plates on Welding Distortion

Welding Distortion Prediction and Mitigation in Thick Steel Plate Structures on Ships

Local Equivalent Welding Element to Predict the Welding Deformations of Plate-Type Structures

Study on FEM Numerical Simulation Method for the Welding Distortion

An algorithm for prediction of bending deformation induced by multi-seam welding of a steel-pipe structure

Nonlinear Computational Welding Mechanics for Large Structures

Numerical computation methods of welding deformation and their application in bogie frame for high-speed trains

Localized Perturbation Load Approach for Buckling Design of Thin-Walled Steel Cylindrical Shells under Partial Axial Compression

ESTABLISHMENT OF MOVING TEMPERATURE FUNCTION METHOD AND ITS APPLICATION ON WELDING DISTORTION PREDICTION OF CYLINDRICAL AND CONICAL ALUMINUM ALLOY STRUCTURES

Numerical simulation of bending deformation induced by multi-seam welding of a steel-pipe structure

Numerical Prediction of Welding Distortion Considering Gravity Force on General Ship Grillage Structure by Elastic Finite Element Method Using Inherent Strain