Abstract:Due to the advantageous characteristics of laser welding technology, it is being increasingly used for constructing stainless steel rail vehicles. It can improve the appearance of a vehicle, enable designs with a relatively high degree of flatness, and ensure higher-quality connections between different parts of a vehicle. Moreover, it can improve the strength and stiffness of the components of the vehicle. In this study, a large-scale assembly module of a stainless steel side-wall was considered as the research object. The combined heat source model of a Gaussian heat source and a cylindrical volume heat source was used to obtain the heat source parameters of laser welding to match the experimental data. Based on the thermal cycle curve method (TCCM), the influence of the number of weld segments and mesh divisions of the local model on the efficiency and accuracy of laser welding simulations was investigated. Thereafter, the research results were applied to the welding simulation of the whole side-wall module. The shape of the molten pool obtained using the combined heat source was closer to that of the experiments (error < 10%), demonstrating the accuracy and effectiveness of the developed the heat source model for laser welding simulation. For local model laser welding using the TCCM, a coarse mesh was used, and the weld was divided into four segments, and highly accurate results were obtained. This calculation time was only 5.97% of that of a moving heat source in case of the thermo-elastic-plastic method (TEPM). Residual stress and welding deformation of the stainless steel side-wall module were calculated according to actual process parameters and the results of local model simulation. Residual stress was discontinuously distributed at the weld segments, and it only slightly influenced the overall stress distribution. The maximum residual stress (462.15 MPa) occurred at the weld of the large crossbeam. Welding eight small and two large crossbeams influenced the deformation change and the maximum deformation (1.26 mm) appeared in the middle position of the left side-wall. The findings of this study show that the TCCM has high calculation accuracy and is sufficiently economical for predicting laser welding of large structures.

Welding Sequence in Large Thin-Walled Structures by Means of Local-Global and Welding Macro Element

Nonlinear Transient Analysis of Butt Welding Based on Finite Element Method

Welding Deformation Predictions of Thin-Wall Cylinders Using a Local-Global Method

Numerical Prediction and Control of Deformation and Residual Stress in Double-Sided Arc Welding of Large Pressure Hull

Prediction of Double-Sided Arc Welding Deformation Based on Dynamic Heat Distribution Model and TEP-FE Approach

A review of welding simulation methods for large components

Nonlinear Computational Welding Mechanics for Large Structures

Investigating Welding Distortion of Thin-Plate Stiffened Panel Steel Structures by Means of Thermal Elastic Plastic Finite Element Method

Research Of Weld On Axial Buckling Stress Of Multilayer Combined Cylindrical Shells

Large-Scale Welding Process Simulation by GPU Parallelized Computing

Prediction of distortion in a thin-plate structure with intermittent fillet joints using a local-to-global approach

Numerical Simulation of Tube-Plate Welding Structure with T-Shaped Sections

Thermal, metallurgical and mechanical analysis of circumferentially multi-pass welded P92 steel pipes

Sensitivity Analysis of Some High Efficiency Computational Methods for Welding Process Numerical Simulation

Numerical simulation of bending deformation induced by multi-seam welding of a steel-pipe structure

Local Equivalent Welding Element to Predict the Welding Deformations of Plate-Type Structures

Numerical computation methods of welding deformation and their application in bogie frame for high-speed trains

Efficient finite element approach for modelling of actual welded structures

Numerical simulation of residual stress and deformation on laser welding of "grooved-coat" structure

Study on FEM Numerical Simulation Method for the Welding Distortion

Laser welding simulation of large-scale assembly module of stainless steel side-wall