Abstract:The mechanical interaction between welded panel and fixture has a remarkable influence on the distribution of weld induced residual stress and distortion.Unfortunately,the influence of fixture is not generally included in conventional numerical simulations of welding process.In the present study,it is proposed that the numerical models in which the mechanical interaction between welded panel and fixture is considered as contact pair in the finite element analysis(FEA) of welding process.This could make the FEA of welding process more scientific and accurate.The fixture constraint plays an important role in accurate modeling of welding process.In the simulations,various mechanical constraint boundary conditions in welding process were thought about to establish the relationships of the normal and tangential mechanical interactions between welded panel and fixture. In Free model,the fixture restraint was not considered.In Mech model,the displacements of nodes where welded panel contacted with fixture were restricted in x,y,z directions.Hard model and Tabular model were contact models which included the fixture.In the normal direction,once welded panel and fixture were in contact,the transmitted contact pressure could be infinite in Hard model.While data pairs of contact pressure vs over-closure or clearance were specified to define a piecewise-linear relationship in the normal direction in Tabular model.A penalty friction coefficient of 0.3 was applied in tangential direction in both Hard and Tabular models.Fixture and welded panel were separated and the contact relationships were removed after the welding process in both Hard and Tabular models. The simulation results of contact models including fixture were more accurate,compared to models containing only welded panel with rigid restrictions.The distortion mode of welded panels under different fixture constraint conditions corresponded well with experimental results.The differences between the distributions of transverse stresses on top and bottom surfaces of welded panel at the beginning of welding process had a crucial influence on the distortion mode of welded panel.

ESTABLISHMENT AND APPLICATION OF FIXTURE CONSTRAINT MODELS IN FINITE ELEMENT ANALYSIS OF WELDING PROCESS

Modified Fourier-Galerkin Solution For Aerospace Skin-Stiffener Panels Subjected To Interface Force And Mixed Boundary Conditions

Simulation and prediction for welding deformation on welding procedure of hand pallet truck

The Influence of Welding Mechanical Boundary Condition on the Residual Stress and Distortion of a Stiffened-Panel

Finite element simulation of welding process and real-time monitoring assessment

Review on finite element analysis of welding deformation and residual stress

Studies on a computational model and the stress field characteristics of weld-bonded joints for a car body steel sheet

Investigating Welding Distortion of Thin-Plate Stiffened Panel Steel Structures by Means of Thermal Elastic Plastic Finite Element Method

A physically consistent 2D residual stress model for approximating 3D effects in welding

Efficient finite element approach for modelling of actual welded structures

Study on FEM Numerical Simulation Method for the Welding Distortion

Effect of welding residual stress on the performance of CFST tubular joints

Residual Stresses Simulation for Friction Stir Welded Joint

Establishment and Application of Material Models for Numerical Simulation of Welding Process

Quality Design of Fixture Planning for Sheet Metal Assembly

Welding-induced stresses and distortion in high-strength steel T-joints: Numerical and experimental study

Researches on mechanical properties of welding reinforcement of end plate connection nodes in steel-structure under loadsby finite element analysis

Studies on the Stress Distribution and Fatigue Behavior of Weld-Bonded Lap Shear Joints

Finite element and experiment analysis of welding residual stress in S355J2 steel considering the bainite transformation

Three-dimensional finite element analysis on welding residual stresses of construction steel

Prediction of distortion in a thin-plate structure with intermittent fillet joints using a local-to-global approach