Abstract:Carbon nanotube field-effect transistors (CNT FETs) have been demonstrated to exhibit high performance only through low-temperature fabrication process and require a low thermal budget to construct monolithic three-dimensional (M3D) integrated circuits (ICs), which have been considered a promising technology to meet the demands of high-bandwidth computing and fully functional integration. However, the lack of high-quality CNT materials at the upper layer and a low-parasitic interlayer dielectric (ILD) makes the reported M3D CNT FETs and ICs unable to provide the predicted high performance. In this work, we demonstrate a multilayer stackable process for M3D integration of high-performance aligned carbon nanotube (A-CNT) transistors and ICs. A low-kappa (similar to 3) interlayer SiO2 layer is prepared from spin-on-glass (SOG) through processes with a highest temperature of 220 C-degrees, presenting low parasitic capacitance between two transistor layers and excellent planarization to offer an ideal surface for the A-CNT and device fabrication process. A high-quality A-CNT film with a carrier mobility of 650 cm(2) V-1 s(-1) is prepared on the ILD layer through a clean transfer process, enabling the upper CNT FETs fabricated with a low-temperature process to exhibit high on-state current (1 mA mu m(-1)) and peak transconductance (0.98 mS mu m(-1)). The bottom A-CNT FETs maintain pristine high performance after undergoing the ILD growth and upper FET fabrication. As a result, 5-stage ring oscillators utilizing the M3D architecture show a gate propagation delay of 17 ps and an active region of approximately 100 mu m(2), representing the fastest and the most compact M3D ICs to date.

III&#x2013;V 4D Transistors

III-V Gate-all-around Nanowire MOSFET Process Technology: from 3D to 4D

Monolithic Three‐dimensional Integration of Aligned Carbon Nanotube Transistors for High‐performance Integrated Circuits

First Experimental Demonstration of Gate-All-around III&#x2013;V MOSFETs by Top-Down Approach

First Experimental Demonstration Of Gate-All-Around Iii-V Mosfets By Top-Down Approach

3-D matrix nano-wire transistor fabrication on silicon substrate

Stacked Lateral Gate-All-Around Metal–Oxide–Semiconductor Field-Effect Transistors and Their Three-Dimensional Integrated Circuits

III-Von-nothing Metal-Oxide-semiconductor Field-Effect Transistors Enabled by Top-Down Nanowire Release Process : Experiment and Simulation

Vertically Integrated, Three-Dimensional Nanowire Complementary Metal-Oxide-Semiconductor Circuits

20&Amp;#x2013;80nm Channel Length InGaAs Gate-All-around Nanowire MOSFETs with EOT&#x003D;1.2nm and Lowest SS&#x003D;63mV/dec

Vertically Stacked Silicon Nanowire Transistors Fabricated by Inductive Plasma Etching and Stress-Limited Oxidation

3D Sidewall Integration of Ultrahigh‐Density Silicon Nanowires for Stacked Channel Electronics

InAs nanowire transistors with multiple, independent wrap-gate segments

Nanotube and Nanowire Transistors

Vertical 3D diamond field effect transistors with nanoscale gate-all-around

3D Electronics: 3D Sidewall Integration of Ultrahigh‐Density Silicon Nanowires for Stacked Channel Electronics (adv. Electron. Mater. 7/2019)

Three-dimensional Vertical ZnO Transistors with Suspended Top Electrodes Fabricated by Focused Ion Beam Technology

Facile 3D Integration of Si Nanowires on Bosch-etched Sidewalls for Stacked Channel Transistors

Sub-5 Nm Gate-All-Around InP Nanowire Transistors Toward High-Performance Devices

Sub-5 nm Gate-All-Around InP Nanowire Transistors Towards High-Performance Devices

All-metal Electrodes Vertical Gate-All-around Device with Self-Catalyzed Selective Grown in As NWs Array

III&amp;#x2013;V 4D Transistors