Abstract:In this paper, the operation mechanism of trench termination is investigated through 2-D numeric simulation on Silvaco. It is found that in trench termination, the electric field is terminated by the accumulated holes at the outer trench sidewall. In order to ensure a high termination breakdown voltage, the trench is refilled with a combination of SiO<sub>2</sub> and polyimide (PI). Through various 2-D numerical simulations, the impact of structural parameters on breakdown voltage has been discussed, namely, trench depth (TD), trench width (TW), and sidewall tilt angle. The 3-D simulations are also conducted to investigate the effect of round corner radius on the device breakdown voltage and electric field in the dielectrics. Based on these results, the trench termination is designed and then fabricated along with a p-i-n diode. The measurement results show that a $14~mu text{m}$ wide trench is sufficient to terminate a voltage of 1750V (>96% of the ideal planar breakdown). Comparing with conventional field limiting rings junction termination extension (FLR/JTE) technology, this trench termination can significantly reduce the termination length by a factor of 4. As a result, the area efficiency is largely improved from 62% to around 90% for a 2A device conducting at 1000 A/cm<sup>2</sup>. These results indicate that the SiC device price can be substantially lowered with such an area-efficient trench termination technology. Furthermore, the 168-h high-temperature reverse bias (HTRB) test under 1200 V and 175 °C shows the potential of this trench termination for long-term reliable operation. Finally, unclamped inductive switching (UIS) tests have been conducted on fabricated devices. Compared to commercial SiC junction barrier Schottky diodes with FLR, fabricated p-i-n diodes with trench termination -how significant higher avalanche capability.

Optimized Design of Single Trench Termination Combined with P-type Buried Layers for Power MOSFETs

Research on Integrated Trench Etching for Trench-Type Power MOSFET

Design of Low Parasitic Inductance SiC MOSFETs Halfbridge Power Modules

Design and Process Analysis of a Split-Gate Trench Power MOSFET with Bottom-Trench Hk-Pillar Superjunction for Enhanced Performance

Design Optimization and Reliability Evaluation in 1.2 kV SiC Trench MOSFET with Deep P Structure

Fabricating and TCAD Optimization for a SiC Trench MOSFET With Tilted P-Shielding Implantation and Integrated TJBS

Trench MOS-gated power devices

Termination Design of 6.5kV SiC MOSFET with Epitaxial Current Spreading Layer

Design strategy and working principle of GaN vertical trench gate MOSFETs with p-type shielding rings

Deep oxide trench termination structure for super-junction MOSFET

1.3 kV Vertical GaN-Based Trench MOSFETs on 4-Inch Free Standing GaN Wafer

Fabrication and Optimization of a High Speed Deep-Trench Super-Junction MOSFET with Improved EMI Performance

4H-Sic Trench-gate MOSFET with JTE Termination

The synergistic effect of vertical structural parameters of vertical-type two-dimensional hole gas diamond MOSFETs on improving the overall performance of devices based on TCAD simulation

4H-Sic Trench Gate Lateral MOSFET with Dual Source Trenches for Improved Performance and Reliability

Design and Characterization of Area-Efficient Trench Termination for 4H-SiC Devices

Modeling and Optimization of Smoothly Tapered Junction Termination Extension for High-Voltage SiC BJTs and Thyristors by Simulation

Trench angle: a key design factor for a deep trench superjunction MOSFET

V-groove trench gate SiC MOSFET with a double reduced surface field junction termination extensions structure

A Lateral Power P-Channel Trench MOSFET Improved by Variation Vertical Doping

4H-Sic Trench Gate Lateral MOSFET with Deep-Shallow Source Trench for Improved RESURF Dose Window and Reduced Oxide Field