Abstract:Abstract.This research focuses on the development of effective protective coatings for carbon-carbon composite materials (CCСM), which are important components in high-temperature processes in aerospace engineering. The application of CCСM is limited by their sensitivity to oxidation, erosion and burnout in gas streams. In light of these limitations, our work is aimed at creating protective coatings using the method of self-propagating high-temperature synthesis, which provide increased performance and extend the service life of composites. The main task of the research is to identify the optimal compositions of powders for chromium-doped protective coatings through the SHS process. Various methods of obtaining protective coatings were analyzed, including chemical-thermal methods and methods of saturation from the liquid phase, revealing the peculiarities of the interaction of coatings with the CCСM matrix and changes in their mechanical characteristics. In addition to the classical methods of obtaining coatings, the method of surface saturation from the solid phase in an active gas environment as part of the SHS process was investigated. This method provides high-quality coating surfaces, reduction of processing time and the possibility of reaching high temperatures, depending on the composition of the SHS mixture. An important element of the research is the analysis of modern publications and research in the field of protective coatings. Special attention is paid to the problems associated with chemical interaction with the matrix of CCСM and uneven formation of carbide phases along the cross-section of the material. Experimental studies include a factorial experiment to identify the compositions of powder mixtures that provide high wear resistance. Various independent variables, such as chromium, silicon, titanium and aluminum content, are considered for their effect on the physical and mechanical properties of the coatings. The study focuses on the optimization of the parameters of thermal autoinitiation of SHS mixtures under process conditions. The regression equation for evaluating the dependences of the wear resistance of coatings on auto-initiation parameters and the content of alloying elements is given. The analysis of the research results includes the construction of three-dimensional graphic dependencies to optimize the wear resistance of coatings in the Cr-Al-Ti and Cr-Al-Si systems. Chromoalumosilicization of the coating showed better wear resistance, exceeding the wear resistance of untreated samples by 2.6-3.2 times, which allows the use of this technology for parts of aerospace equipment. It is interesting that the porous surface of coatings obtained by the SHS method prevents the penetration of oxygen into the material, contributing to the formation of oxide protective membranes, such as SiO2, TiO2, Cr2O3, Al2O3.

THERMODYNAMIC ANALYSIS OF FLAME SPRAY SYNTHESIS TiC-Fe CERMET COATINGS

The Microstructure of Al2O3/TiO2-NiCrBSi Graded Thermal Barrier Coatings Produced by Flame Spraying

Kinetics and numerical simulation of self-propagating high-temperature synthesis in Ti–Cr–Al–C systems

Combustion Synthesis of TiC–Fe Composites under the Action of an Electric Field

High Temperature Erosion Properties of Arc-Sprayed Coatings Using Various Cored Wires Containing Ti–Al Intermetallics

TiC-TiSi2-Al2O3 composite coatings prepared by spray drying, heat treatment and plasma spraying

Microstructure, Microhardness, Fracture Toughness, and Abrasive Wear of In-Situ Synthesized TiC/Ti-Al Composite Coatings by Cold Spraying Combined with Heat Treatment

In-situ TiC-Ti5Si3-SiC composite coatings prepared by plasma spraying

Study on microstructure evolution and reaction mechanism of in-flight Ti–Si–C agglomerates during reactive plasma spraying using in situ water quenching

TiC-Fe cermets fabricated by SHS

Investigation on microstructure of TiC-Fe cermets prepared by SHS/PHIP

IMPROVING THE THERMAL STABILITY OF CARBON-CARBON COMPOSITE MATERIALS USING SELF-PROPAGATINGHIGH-TEMPERATURE SYNTHESIS

Self-propagating high-temperature synthesis in Ti-W-C system

Self‐Propagating High‐Temperature Synthesis Flammable Range and Dominant Parameters for Synthesizing Several Ceramics and Intermetallic Compounds under Heat‐Loss Condition

High-Temperature Wear Behavior and Mechanisms of Self-Healing NiCrAlY-Cr3C2-Ti2SnC Coating Prepared by Atmospheric Plasma Spraying

Present Status and Development of Combustion Synthesizing of Ce- ramic Coating

Fabrication of plasma-sprayed TiC-Ti5Si3-Ti3SiC2 composite coatings from the annealed Ti/SiC powders

Microstructure evolution of Fe-Ti-C system synthesized by low temperature combustion induced in electric field

Preparation of Ti3AlC2 and Ti2AlC by self-propagating high-temperature synthesis and study on the reaction mechanism

Combustion Synthesis of Fe-Ti-C System by Electric Field Inducement: Effect of Electric Current on the Synthesis Products

Microstructure evolution and mechanical properties of reactive plasma sprayed Ti3SiC2–Ti5Si3–TiC composite coatings