Abstract:Radiative initiation of a combustion wave in the self-propagating high-temperature materials synthesis (SHS) process was analyzed for a mixture compact by use of a heterogeneous theory which accounts for the premixed mode of bulk flame propagation as well as the nonpremixed mode of consumption of the non-metal (or higher-melting-point metal) particles. In the realistic limit of diffusion-controlled combustion, which nevertheless is still highly temperature sensitive because of the Arrhenius nature of mass diffusion, the analysis successfully identified the functional dependence of the various system parameters related to flame initiation on the particle size, a feature of which was not captured in previous theoretical works based on homogeneous flame propagation. Specifically, calculated results showed that the ignition delay increases with decreasing mixture ratio, increasing dilution, decreasing intensity and beam diameter of the heat flux, and increasing particle size. Furthermore, in the presence of heat loss which is inevitable. there also exist absolute ignition limits beyond which the mixture compact is not ignitable. Such nonignition events are manifested by the failure to either establish a combustion wave, for large particles or moderate heat fluxes. or sustain the propagation of an established wave even though the particle size is small and the heat flux is strong. Comparison with experimental data showed satisfactory agreement, both qualitatively and quantitatively, thereby substantiating the viability of the present heterogeneous theory of flame initiation.

Self‐Propagating High‐Temperature Synthesis Flammable Range and Dominant Parameters for Synthesizing Several Ceramics and Intermetallic Compounds under Heat‐Loss Condition

SHS Combustion Characteristics of Several Ceramics and Intermetallic Compounds

Self-Propagating High-Temperature Synthesis of Layered Composite Ti/Hf/Ta/Ni/Ceramics Materials

Kinetics and numerical simulation of self-propagating high-temperature synthesis in Ti–Cr–Al–C systems

Transient radiative initiation of the heterogeneous flame in self-propagating high-temperature materials synthesis: Theory and experimental comparisons

Combustion synthesis of advanced materials: Part I. Reaction parameters

Propagation and extinction of nonadiabatic heterogeneous flame in the SHS process

Pulsating Instability in the Nonadiabatic Heterogeneous Shs Flame: Theory and Experimental Comparisons

Microstructural Evolution During Self-Propagating High Temperature Synthesis of Ti2AlC Machinable Ceramics

THERMODYNAMIC ANALYSIS OF FLAME SPRAY SYNTHESIS TiC-Fe CERMET COATINGS

Computation and Analysis of Thermodynamics of Self-propagating High-temperature Synthesis TiC-Ni Cermets

Self-propagating high-temperature synthesis in Ti-W-C system

Research on TiC-Ni-Mo Composites by Combustion Synthesis

Thermal Shock Resistance and Ablation Behavior of Tib2-Cu-Ni Composite Via Combustion Synthesis

Self-propagation High-temperature Synthesis of Porous TiB2-TiC Multiphase Ceramics

Novel refractory high-entropy ceramics: Transition metal carbonitrides with superior ablation resistance

Ablation-Resistance of Combustion Synthesized TiB2-Cu Cermet: Ablation-Resistance of Combustion Synthesized Cermet

Dissolution–precipitation mechanism of self-propagating high-temperature synthesis of mononickel aluminide

Self-propagating high temperature combustion synthesis of TiB/Ti composites

Mechanism of Self-Propagating High-Temperature Synthesis of AlB2–Al2O3 Composite Powders

Dissolution–precipitation–substitution Mechanism of Self-Propagating High-Temperature Synthesis of Β-Nial(cu)/α(cu,ni) Composite