Abstract:Combustion of powders of transition metals of titanium PTS (average particle size 57 μm), zirconium PCRK-1 (12 μm), tantalum Ta PM-3 (8 μm), hafnium GFM-1 (4 μm), niobium NBP-1a (21 μm) with carbon black grade P-803 dispersion 1–2 μm was studied. The combustion process of the compressed samples (mass 2.5–6.9 g, height 1.2–1.7 cm, relative density 0.55–0.61) was performed in an inert argon medium at a pressure of 760 mmHg in the constant pressure chamber. Combinations were studied, Me1 + Me2 + Me3 + Me4 + 4C, Me1 + Me2 + Me3 + Me4 + Me5 + 5C. XRD patterns of the mixtures were recorded on a DRON-3М diffractometer (CuKα-radiation). Combustion product sections were studied using a LEO 1450 VP scanning electron microscope (Carl Zeiss, Germany). The fractional composition and particle size distribution of the mixture were determined according to standard procedure using a Microsizer-201C laser particle size analyzer. Combustion velocity, elongation of samples, phase composition of products were determined. The maximum combustion temperature of the mixture (Ti + Hf + Zr + Nb + Ta) + 5C was measured experimentally for the first time. The morphology and microstructure of the reaction products were also observed. Combustion products of mixtures (Ti + Zr + Nb + Ta) + 4C and (Ti + Zr + Nb + Hf) + 4C contain high entropy carbides, which are solid solutions with the same structural type B1 (space group Fm-3m) and having different cell parameters. Product samples of mixtures (Ti + Zr ++ Hf + Ta) + 4C and (Ti + Hf + Zr + Nb + Ta) + 5C contain high entropy and medium entropy carbides, also representing solid solutions with the same structural type B1 (space group Fm-3m). The results of this work can be used in the production of high-entropy and medium-entropy multicomponent carbides.

SHS Combustion Characteristics of Several Ceramics and Intermetallic Compounds

Self‐Propagating High‐Temperature Synthesis Flammable Range and Dominant Parameters for Synthesizing Several Ceramics and Intermetallic Compounds under Heat‐Loss Condition

Transient radiative initiation of the heterogeneous flame in self-propagating high-temperature materials synthesis: Theory and experimental comparisons

Pulsating Instability in the Nonadiabatic Heterogeneous Shs Flame: Theory and Experimental Comparisons

On The Transition Boundary From Steady To Pulsating Combustion In Shs Flames

Features of SHS of multicomponent carbides

On the correspondence between the homogeneous and heterogeneous theories of SHS

Propagation and extinction of nonadiabatic heterogeneous flame in the SHS process

Bimodal Particle Dispersion in the Nonadiabatic Heterogeneous SHS Flame Propagation

Exploring the Combustion Mechanism of Single Micron-Sized Aluminum Particles with a Numerical Model

Combustion synthesis of advanced materials: Part I. Reaction parameters

Combustion Kinetics Characteristics of Solid Fuel in the Sintering Process

Reaction Behavior and Formation Mechanism of ZrB2 and ZrC from the Ni-Zr-B4C System during Self-Propagating High-Temperature Synthesis

Investigations into the Ignition Behaviors of Pulverized Coals and Coal Blends in a Drop Tube Furnace Using Flame Monitoring Techniques

Self-propagating high-temperature synthesis in Ti-W-C system

Kinetics and numerical simulation of self-propagating high-temperature synthesis in Ti–Cr–Al–C systems

Effects of Ti/Al Ratio on Formation of Ti-Al Intermetallics/TiB2 Composites by SHS from Ti-Al-B Powder Mixtures

Mechanism of Self-Propagating High-Temperature Synthesis of AlB2–Al2O3 Composite Powders

Research and development of SHS theory (2)

Combustion behavior and mechanism of Ti-25V-15Cr compared to Ti-6Al-4V alloy

Progress of porous Al-containing intermetallics fabricated by combustion synthesis reactions: a review