Abstract:Corrosion of reinforcement in concrete civil structures poses a significant challenge to their integrity and durability. To ensure the safety and longevity of such structures, effective monitoring strategies that can accurately detect, localise and assess the progression of damage are crucial. For most existing concrete structures, this is often challenging, as damage is already present when the monitoring campaign starts. In addition, reinforced concrete structures can be subject to a combination (or a succession) of corrosion and load-induced damage. By combining multiple measurement techniques, a more accurate and reliable condition assessment of concrete civil structures can be aimed for. This paper presents a comprehensive experimental study of the combination of vibration-based monitoring (VBM) and acoustic emission (AE) sensing techniques during progressive load tests of corroded reinforced concrete beams. Five beams were subjected to a cyclic four-point bending test, three of which were previously corroded while two beams remained undamaged prior to the mechanical loading. The influence of pre-existing corrosion damage and corresponding longitudinal concrete cracking on the modal characteristics (natural frequencies and strain mode shapes) and AE outcomes is investigated during the four-point bending test. The monitoring results obtained by both techniques are shown to be influenced by the pre-existing longitudinal concrete cracking caused by the reinforcement corrosion. Lower AE activity and a lower reduction in natural frequencies is observed for corroded RC beams during load bending tests when compared to uncorroded specimens. In addition, bending cracks occurring within the corroded zones appear to have a very limited effect on the identified strain mode shapes. These observations could possibly result in an underestimation of the damage and corresponding overestimation of the load-carrying capacity, as the corrosion damage conceals the occurrence of bending cracking on the AE and VBM outcomes.

Damage Test and Monitoring of Reinforced Concrete (RC) Beams under Four-Point Bending

Shear Tests of Reinforced Concrete Beams with the Influence of Initial Shear Cracks

INCORPORATING PRE-EXISTING CRACKS IN STRUCTURAL ASSESSMENT OF RC STRUCTURES

Influence of Longitudinal Bar Corrosion on Impact Behavior of RC Beams

To Monitor Fracture Behaviors in Four-Point Cyclic Bending Tests of Low-Activated High Alumina Concrete and Standard Concrete RC Beams Using Acoustic Emission Technique

Uniaxial Concrete Tension Damage Evolution Using Acoustic Emission Monitoring

Cracking Mechanism of Corroded Reinforced Concrete Column Based on Acoustic Emission Technique

Acoustic Emission Study on the Damage Evolution of a Corroded Reinforced Concrete Column under Axial Loads

Acoustic Emission Analysis of Corroded Reinforced Concrete Columns under Compressive Loading.

Vibration monitoring and acoustic emission sensing during progressive load tests of corroded reinforced concrete beams

Study on Degradation Regularity of Bearing Capacity of RC Beams under Corrosive Conditions

Acoustic Emission Monitoring of Progressive Damage of Reinforced Concrete T-Beams under Four-Point Bending

Cracking Behavior of Cfrp Laminate-Strengthened Rc Beams with Premechanical and Postmechanical Environmental Damage

Performance of Reinforced Concrete Beams Corroded under Sustained Service Loads: A Comparative Study of Two Accelerated Corrosion Techniques

Crack Propagation and Flexural Behaviour of Rc Beams under Simultaneous Sustained Loading and Steel Corrosion

FLEXURAL CAPACITY OF CORROSION-DAMAGED RC BEAMS

Analysis of Low-Temperature Damage of Reinforced Concrete Beams Using Acoustic Emission Parameters

Nondestructive Monitoring Techniques for Crack Detection and Localization in RC Elements

Experimental study on flexural capacity of reinforced concrete beams in marine environment

Evaluation of damage in reinforced concrete bridge beams using acoustic emission technique

Residual strengths of reinforced concrete beams with heavy deterioration