Abstract:The structural degradation of steel bars in reinforced concrete (RC) beams due to the adverse effects of corrosion is a leading cause of the increasing likelihood of RC beam failure. Through the previous researches, it can be seen that the mechanical properties , crack initiation threshold, fracture threshold, and fatigue life of steel bars are closely linked to their corrosion profiles and the corrosion levels. However, due to limitations of testing equipment, accurately identifying the corrosion profiles of corroded steel bars has proven challenging. Therefore, at present, only predictive models have been established using regression analysis to investigate the mechanical properties and fatigue performance of corroded steel bars, and corresponding theoretical models for their assessment have not yet been developed. In order to establish corresponding theoretical models for precise evaluation of the mechanical properties and fatigue performance of corroded steel bars. Firstly, an artificial accelerated corrosion test was conducted on steel bars to assess their mechanical properties and fatigue performance. Different levels of corrosion were analyzed to understand the associated failure modes and to determine the cracking threshold and fracture threshold of the corroded steel bars.Secondly, a 3D scanner was employed to capture the surface profiles of steel bars with varying degrees of corrosion. Based on the data gathered from these scans, predictive models were developed to assess the mechanical properties and fatigue performance of corroded steel bars. Furthermore, corresponding finite element models were established to further investigate the impact of steel wire corrosion on the remaining service life of the bars. The results of our research demonstrate the effectiveness of the load-bearing capacity assessment proposed in this paper, as it accurately predicts the load-bearing capacity of corroded wires and aligns well with experimental findings. Additionally, our study revealed that the cracking threshold value for all types of steel bars exceeded 6.2 MPa·m 1/2 , and the fracture threshold intensity factor decreased as steel bars experienced more severe corrosion.

Influence of Longitudinal Bar Corrosion on Impact Behavior of RC Beams

Corrosion-Induced Cracking Propagation Of Rc Beams Subjected To Different Corrosion Methods And Load Levels

Corrosion-induced Shear Performance Degradation of Reinforced Concrete Beams

Cracking of Reinforced Recycled Aggregate Concrete Beams Subjected to Loads and Steel Corrosion

Experimental Investigation on Performance of Cantilever CFRP-wrapped Circular RC Columns under Lateral Low-Velocity Impact

Effects of Reinforcement Corrosion and Sustained Load on Mechanical Behavior of Reinforced Concrete Columns.

Performance of Reinforced Concrete Beams Corroded under Sustained Service Loads: A Comparative Study of Two Accelerated Corrosion Techniques

Effect of Chloride-Induced Reinforcing Steel Corrosion on the Flexural Strength of Reinforced Concrete Beams

Study on Degradation Regularity of Bearing Capacity of RC Beams under Corrosive Conditions

Shear Performance of Reinforced Concrete Beams with Corroded Stirrups in Chloride Environment

Corrosion Characteristics of A 4-Year Naturally Corroded Reinforced Concrete Beam with Load-Induced Transverse Cracks

Effect of Corrosion on Bond Behavior and Bending Strength of Reinforced Concrete Beams

FLEXURAL CAPACITY OF CORROSION-DAMAGED RC BEAMS

Crack Propagation and Flexural Behaviour of Rc Beams under Simultaneous Sustained Loading and Steel Corrosion

EXPERIMENTAL INVESTIGATION AND DESIGN OF SEVERELY CORRODED REINFORCED CONCRETE BEAMS

NUMERICAL INVESTIGATION OF SEVERELY CORRODED REINFORCED CONCRETE BEAMS

Bending Characteristics of Corroded Reinforced Concrete Beam under Repeated Loading

Experimental and Numerical Study on Ultimate Shear Load Carrying Capacity of Corroded RC Beams

Comprehensive study on corrosion induced structural deterioration of steel bars in reinforced concrete beams

Effects of Reinforcement Corrosion and Repeated Loads on Performance of Reinforced Concrete Beam

Cracking Characteristics of Corroded Rc Beams under Repeated Loading