Abstract:To accurately obtain the performance of concrete structures in coastal regions, it is necessary to correctly understand the damage evolution law of reinforced concrete (RC) members under real working conditions. In this paper, four RC beams, subjected to different levels of corrosion and sustained load, are first tested. Reinforcement corrosion coupled with sustained load increases the number and width of cracks at the soffit of beams but decreases their loading capacities. Crack width of the corroded beam under 50% of designed load is two times of that under 30% of designed load. Residual loading capacities of the corroded beams subjected to 30% and 50% of designed load are 87.5% and 81.8% of the control beam. A finite element model is developed for the corroded RC beams. Due to less confinement, concrete below and at the sides of reinforcements is subjected to a higher stress, compared to concrete above the reinforcements. Corrosion expansion of reinforcements is successfully modelled by a temperature-filed method, as it properly simulates the damage evolution of the corroded RC beams. As a result, concrete cracking, caused by the reinforcement corrosion, is well captured. Coupling reinforcement corrosion with sustained load significantly increases the damage level in RC beams, particularly for those subjected to a high sustained load. The whole damage evolution process of concrete cracking due to corrosion expansion under the coupling effect of sustained loading and environment can be simulated, thus providing a reference for the durability evaluation, life prediction, and numerical simulation of concrete structure.

Study on Degradation Regularity of Bearing Capacity of RC Beams under Corrosive Conditions

Influence of Longitudinal Bar Corrosion on Impact Behavior of RC Beams

Corrosion-induced Shear Performance Degradation of Reinforced Concrete Beams

Mechanical Degradation of Reinforced Concrete Columns Corroded Under Sustained Loads

Corrosion-Induced Cracking Propagation Of Rc Beams Subjected To Different Corrosion Methods And Load Levels

Cracking of Reinforced Recycled Aggregate Concrete Beams Subjected to Loads and Steel Corrosion

Performance of Reinforced Concrete Beams Corroded under Sustained Service Loads: A Comparative Study of Two Accelerated Corrosion Techniques

Effects of Reinforcement Corrosion and Sustained Load on Mechanical Behavior of Reinforced Concrete Columns.

Residual strengths of reinforced concrete beams with heavy deterioration

FLEXURAL CAPACITY OF CORROSION-DAMAGED RC BEAMS

EXPERIMENTAL INVESTIGATION AND DESIGN OF SEVERELY CORRODED REINFORCED CONCRETE BEAMS

Effect of Corrosion on Bond Behavior and Bending Strength of Reinforced Concrete Beams

Crack Propagation and Flexural Behaviour of Rc Beams under Simultaneous Sustained Loading and Steel Corrosion

CFRP Strengthened RC Beams with Pre-Strengthening Non-Uniform Reinforcement Corrosion Subjected to Post-Strengthening Wetting/drying Cycles

Shear Performance of Reinforced Concrete Beams with Corroded Stirrups in Chloride Environment

Damage Evolution Of Rc Beams Under Simultaneous Reinforcement Corrosion And Sustained Load

Study on Mechanical Properties of Steel-Concrete Composite Beam with Corroded Studs Under the Effect of Negative Bending Moment

Influence of pitting corrosion on the bending capacity of reinforced concrete beams

Monotonic and fatigue behavior of steel-concrete composite beams subjected to corrosion

NUMERICAL INVESTIGATION OF SEVERELY CORRODED REINFORCED CONCRETE BEAMS

Static and Fatigue Behavior of Steel-Concrete Composite Beams with Corroded Studs