Abstract:The main objectives of this study are to investigate the effects of three types of predamage and postdamage on the cracking behaviors of carbon fiber-reinforced polymer (CFRP)-strengthened reinforced concrete RC beams and to develop a rational methodology for predicting the average stabilized crack spacing. The predamage is induced by either sustained loading only or by the combination of sustained loading and corrosion. The predamage involved a sustained loading with an anchor tightening system, an electrochemical process to accelerate the migration of chlorides from an external electrolyte into the tested beams, and a wetting-drying cycle process with a controlled current to accelerate the corrosion of the reinforcing steel bars in the tested beams. The postdamage was induced by wetting-drying cycles. A loading test was conducted to determine the cracking behaviors of stabilized flexural cracks in the CFRP-strengthened beams with or without damage. The crack patterns, crack spacings, and test beam widths were recorded and compared, and the related mechanism was discussed. It was found that after CFRP strengthening, the effect of predamage or postdamage on the crack spacing and width is not as distinct as in the unstrengthened cases. The sustained loading predamaged beam showed insignificant differences in crack spacing and width compared to beams without predamage. Subsequently, a model capable of evaluating the crack behaviors of CFRP-strengthened beams with or without damage was developed. The analytical approach is based on equilibrium and compatibility equations to elucidate the average stresses of concrete and the CFRP laminate of a CFRP-strengthened beam element. (C) 2014 American Society of Civil Engineers.

Cracking Behavior of Cfrp Laminate-Strengthened Rc Beams with Premechanical and Postmechanical Environmental Damage

INCORPORATING PRE-EXISTING CRACKS IN STRUCTURAL ASSESSMENT OF RC STRUCTURES

Automated Finite Element Modeling and Analysis of Cracked Reinforced Concrete Beams from Three Dimensional Point Cloud

CFRP Strengthened RC Beams with Pre-Strengthening Non-Uniform Reinforcement Corrosion Subjected to Post-Strengthening Wetting/drying Cycles

Corrosion-Induced Cracking Propagation Of Rc Beams Subjected To Different Corrosion Methods And Load Levels

Experimental Investigation on First Crack Strength and Crack Widthof Reinforced Concrete Beamsby Side-Bonding Cfrp Sheets

Cracking of Reinforced Recycled Aggregate Concrete Beams Subjected to Loads and Steel Corrosion

Dynamic Behavior of CFRP-Strengthened Reinforced Concrete Beams Without Stirrups under Impact Loading

Crack Propagation and Flexural Behaviour of Rc Beams under Simultaneous Sustained Loading and Steel Corrosion

Behavior of Preloaded RC Beams Strengthened with CFRP Laminates

Experimental and numerical study on multi-impact performance of pre-damaged beams strengthened with CFRP

Study on flexural performance of cracked RC beams retrofitted with CFRP sheets

Damage Evolution Of Rc Beams Under Simultaneous Reinforcement Corrosion And Sustained Load

Effect of sustaining load level on flexural behavior of RC beams retrofitted with CFRP sheets

Behavior of Pre-Cracked Reinforced Concrete Beam Strengthened with Prestressed CFRP Plate

Study on Crack Resistance and Calculation Model of RAC Beams Strengthened with Prestressed CFRP

Analytical Model for Concrete Cover Separation of FRP Strengthened RC Beams with Multiple Steel Bolts

Corrosion-induced Shear Performance Degradation of Reinforced Concrete Beams

Calculation of Creep Deformation of Stiffness-Degraded RC Beams after Strengthening with Increased Cross-Section

Predicting deflection of retrofitted reinforced concrete beams

Ductility and Cracking Behavior of Prestressed Concrete Beams Strengthened with Prestressed CFRP Sheets