Effect of sustaining load level on flexural behavior of RC beams retrofitted with CFRP sheets

Li Guibing,Zhang Aihui,Jin Weiliang

DOI: https://doi.org/10.3321/j.issn:1000-131X.2006.01.003

2006-01-01

Abstract:The research reported in this paper is to investigate the effects of externally bonded CFRP sheets on flexural performance of beams subjected to different levels of sustaining load. To this end, a series of 16-RC beams retrofitted with CFRP sheets and 2 control beams were tested, and the theoretical analysis was conducted to explain the experimental phenomena and test results. The experimental parameters include rebar ratio, number of plies of CFRP laminates and sustaining load level at the time of retrofitting. This paper presents a detailed analysis on the sustaining load levels that may have significant influence on the flexural behavior of the strengthened RC beams. Both the experimental and analytical results indicated that the stiffness of all the strengthened beams had been increased evidently as compared to that of the control beams. This phenomenon implies that FRP played an important role to increase the stiffness, thus reduce the deflections of the strengthened beams. The sustaining loads have an obvious effect on the stiffness of the strengthened beams, especially on the average tangent stiffness at post-cracking stage. The experimental and analytical results in this paper are novel, and the findings may be considered for possible adoption into the design codes, also for practical engineering applications.