Abstract:This article presents an 18 similar to 30 GHz vector-sum phase shifter for wireless application in the millimeter-wave regime. It is composed of an I/Q signal generator, two variable-gain amplifiers (VGA), and a digital-to-analog converter with a quadrant selector. To attain wideband quadrature signal, a two-stage hybrid based on transformers is proposed to realize the I/Q signal generator. The first- and second-stage hybrids are designed with different resonating frequencies. As a result, the amplitude and phase errors of the I/Q signal generator are significantly decreased in a wide frequency band. In addition, theoretical analysis based on a simplified equivalent-circuit model is performed to guide the circuit implementation, and its correctness is demonstrated by electromagnetic simulation. To mitigate the impact of the VGAs' parasitics on the phase performance, a capacitive-neutralization technique is applied to cancel parasitics of transistors in the VGAs. A prototype circuit is designed using a 130-nm SiGe BiCMOS process. The measured results show that the circuit achieves a root-mean-square (RMS) amplitude error of less than 1.4 dB and an RMS phase error of 1.4 degrees similar to 3.4 degrees across 18 similar to 32 GHz. The tested peak gains of all the phase states are -1 similar to 4.5 dB with an input balun (approximate to 1.9 dB loss) and an output balun (approximate to 2 dB loss) at 22 GHz. Also, the input 1-dB compression point and noise figure are tested, which are >=-1 dBm and <= 15.5 dB in the targeting frequency band.

A 91.9-113.2 GHz Compact Frequency Tripler with 44.6 dBc Peak Fundamental Harmonic-Rejection-Ratio Using Embedded Notch-filters and Area-Efficient Matching Network in 65 nm CMOS

A Wideband CMOS Frequency Quadrupler with Transformer-Based Tail Feedback Loop.

A Compact 2-18Ghz Ultra-Wideband Frequency-conversion T/R Module Based on a 3D Heterogeneous Integrated Process

An 81–99 GHz Tripler with Fundamental Cancellation and 3rd Harmonic Enhancement Technique in 40-Nm CMOS

An 18 similar to 30 GHz Vector-Sum Phase Shifter With Two-Stage Transformer-Based Hybrid in 130-nm SiGe BiCMOS

An Ultra-Low Power K band Balanced Frequency Doubler with a Novel Current-reused Structure

A Gm-boosted and current peaking wideband merged LNA and mixer

A 27 - 57 GHz Down-conversion Mixer with Bulk Injection Technique

A K-Band Frequency Tripler Using Transformer-Based Self-Mixing Topology with Peaking Inductor

Design of a 500 GHz Frequency Tripler with a Probe-based Idle Harmonic Control Technique

A 135–150-Ghz Frequency Tripler with Waveguide Filter Matching

A 315–345 GHz quad‐port balanced tripler with inherent suppressions on even‐order harmonics using discrete Schottky diodes

A CMOS W-band ×4 frequency multiplier with cascading push-pull frequency doublers

Design of High Power Tripler Based on On-Chip Schottky Diodes

Design of A Microwave Frequency Tripler with Conversion Gain

A 135–150 GHz High-Power Frequency Tripler with Filtering Matching Network

A 232GHz Frequency Multiplier Chain(×4) in 65-nm CMOS with Harmonic Rejection Ratio of 40dBc

A W-Band Frequency Tripler with Integrated Waveguide Filter Matching

A 5.1 Dbm 127–162 GHz Frequency Sextupler with Broadband Compensated Transformer-Based Baluns in 22nm FD-SOI CMOS

A 17.4-26.4-ghz Dual-Injection Injection-Locked Frequency Tripler Featuring Low Power Consumption and High Harmonic Rejection

A 220 GHz Frequency Tripler Based on AlN Substrate