Abstract:Top-gate self-aligned structured oxide thin-film transistors (TFTs) are suitable for the backplanes of high-end displays because of their low parasitic capacitances. The gate insulator (GI) deposition process should be carefully designed to manufacture a highly stable, high-mobility oxide TFT, particularly for a top-gate structure. In this study, a nanometer-thick Al2O3 layer via plasma-enhanced atomic layer deposition (PE-ALD) is deposited on the top-gate bottom-contact structured oxide TFT as the interface tailoring layer, which can also act as the hydrogen barrier to modulate carrier generation from hydrogen incorporation into the active layer of the TFT during the following process such as postannealing. Al-doped InSnZnO (Al/ITZO) with an Al/In/Sn/Zn atomic ratio composition of 1.7:24.3:40:34 was used for high mobility oxide semiconductors, and an Al2O3/Si3N4 bilayer was used for the GI. The degradation issue due to the excellent barrier characteristics of Al2O3 and Si3N4 can be minimized. An oxide TFT fabricated without the interface tailoring layer exhibits conductor-like characteristics owing to the excessive carrier generation by hydrogen incorporation. However, TFTs with additional interface layers exhibit reasonable characteristics and distinct trends in electrical characteristics depending on the thicknesses of the interface layers. The optimized devices exhibit an average turn-on voltage (Von) of -0.31 V with 33.63 cm2/(V s) of high mobility and 0.09 V/dec of subthreshold swing value. The interfaces between the active layer and hydrogen barriers were investigated using a high-resolution transmission electron microscope, contact angle measurement, and secondary ion mass spectroscopy to reveal the origin of the trends in properties between the devices. The top-gate device with a hydrogen barrier using the four-cycle deposition exhibits optimum electrical characteristics of both high mobility and good stability with only a 0.04 V shift of Von under positive-bias temperature stress (PBTS). We realize a high-end, self-aligned TFT with high mobility [34.7 cm2/(V s)] and negligible Von shift of -0.06 V under PBTS by applying a subnanometer hydrogen barrier.

Sub-Micron Oxide TFT for the Era of Oxide-Based Display

Oxide-Semiconductor-Based TFTs for Displays and Flexible Electronics

Strategies for Applications of Oxide-Based Thin Film Transistors

Addressing the Conflict between Mobility and Stability in Oxide Thin‐film Transistors

Compact Integration of Hydrogen–Resistant a–InGaZnO and Poly–Si Thin–Film Transistors

Sub-100 Nm Self-Aligned Top-Gate Amorphous InGaZnO Thin-Film Transistors with Gate Insulator of 4 Nm Atomic-Layer-Deposited AlOx

Al2O3/HfO2 Nanolaminate Dielectric Boosting IGZO-Based Flexible Thin-Film Transistors

Bendable metal oxide thin-film transistors and circuits for analog electronics applications

High-Performance Flexible a-IGZO TFTs Adopting Stacked Electrodes and Transparent Polyimide-Based Nanocomposite Substrates

50‐4: Invited Paper: Low‐Temperature Metal‐Oxide Thin‐Film Transistor Technology and the Realization of Electronic Systems on Flexible Substrates

Flexible a-IGZO TFT Technology: New Developments & Applications

Self-Aligned Elevated-Metal Metal-Oxide Thin-Film Transistors for Displays and Flexible Electronics

Room-temperature fabrication of flexible oxide TFTs by co-sputtering of IGZO and ITO

Bilayer Metal Oxide Channel Thin Film Transistor With Flat Interface Based on Smooth Transparent Nanopaper Substrate

Flexible Thin-Film Transistor and Integration Strategies for Future Intelligent Displays

20.1: Invited Paper: Research on Oxide Thin Film Transistors for Wearable Sensors

31-Inch 4K Flexible Display Employing Gate Driver With Metal Oxide Thin-Film Transistors

High Performance Indium‐Gallium‐Zinc Oxide Thin Film Transistor via Interface Engineering

Low-temperature solution-processed flexible metal oxide thin-film transistors via laser annealing

In-Plane-Gate Oxide-Based Thin-Film Transistors Self-Aligned on Stacked Self-Assembled Monolayer/$\hbox{SiO}_{2}$ Electrolyte Dielectrics

Engineering a Subnanometer Interface Tailoring Layer for Precise Hydrogen Incorporation and Defect Passivation for High-End Oxide Thin-Film Transistors