Abstract:3D monolithic integration of logic and memory devices has emerged as one of the key enablers for next-generation electronic devices to address the ever-increasing demand for higher integration density, better performance and energy efficiency. BEOL-compatible oxide semiconductors show great potential to revolutionize the field thanks to their unique properties [1]. We present our recent advancement related to BEOL-compatible oxide semiconductors for logic and memory applications. The digital-etch-enabled nanowire transistors and α -IGZO-based eDRAM will first be discussed, followed by the ferroelectric (FE) memories with high performance and novel structures utilizing α -IGZO or ALD-deposited ZnO as the channel. Ultra-scaled amorphous IGZO ( α -IGZO) nanowire field-effect transistors (NW-FETs) hold great potential for applications demanding high performance and integration density. To realize the fabrication of high-quality and aggressively-scaled nanowire structures, a novel digital etching method for amorphous α -IGZO materials has been proposed and demonstrated [2]. Confirmed by the SEM images of an α -IGZO nanowire before and after digital etching, a notable nanowire width W NW reduction can be observed. We have the thinnest α -IGZO nanowire achieved by the digital etching with a W NW of approximately 20 nm. By further developing the transistor upon the nanowire, the α -IGZO NW-FET attains a good subthreshold swing (SS) of 80 mV/decade and a high peak extrinsic transconductance ( G m, ext ) of 612 μS/μm at V DS of 2 V (456 μS/μm at V DS = 1 V). Compared to the previous studies, our IGZO NW-FET achieves one of the highest peak G m values among all IGZO-based FETs. Besides the BEOL compatibility and high on-current, ultra-low subthreshold leakage makes α -IGZO FETs extremely promising for eDRAM. We further investigated the potential of α -IGZO eDRAM by developing the charge-domain compute-in-memory (CiM) [3]. Experiments have demonstrated small SS, large on-state current, and long-time charge retention with our dedicated 4T1C memory cell. With differential cell structure, an even higher tolerance for charge loss can be attained. With experiment-calibrated benchmarking in the VGG-8 network for CIFAR-10 image classification tasks, 2092 TOPS/W power efficiency for the CiM core can be expected, outperforming the prior TFT and CMOS-based CiM approaches, exhibiting significant advantages for ultra-low-power applications. The integration of doped-HfO 2 FE material and oxide semiconductor, both BEOL-compatible with large-scale and cost-effective deposition, presents a promising avenue for advancing data storage in the future. We have developed the high-performance α -IGZO Fe-FET with a metal-ferroelectric-metal-oxide-semiconductor (MFMIS) structure as well as the Fe TCAM [4]. The α -IGZO Fe-FET achieves a large memory window of ~3 V with high reliability, while the Fe TCAM reduces the transistor number from 16 to 2 compared to the traditional SRAM-based one. Besides α -IGZO, we believe that ALD-based oxide semiconductors featuring high controllability of film thickness and conformal coverage of the 3D structures can create new opportunities for novel device structure and integration. The fin-gate ZnO Fe-FET stands for a great example while not only outstanding device performance but also suppressed device-to-device variation due to the unique structure have been demonstrated, holding tremendous promise for high-density 3D integration [5]. Acknowledgments: This work is supported by Singapore Ministry of Education (Tier 2: MOE2018-T2-2-154, Tier 1: R-263-000-D65-114). References : [1] S. Dutta et al. , IEDM, p. 36.4., 2020. [2] K. Han et al. , VLSI , 2021, p. T10-1. [3] J. Liu et al. , IEDM , 2021, p. 46.2. [4] C. Sun et al. , VLSI , 2021, p. T7-4. [5] Q. Kong et al. , IEDM , 2022, p. 12.3.

Area-Efficient Integration of Embedded 0.5F0.5R Hybrid Memory and High Mobility Logic Device on Ge

Forming-Free HfOx-Based Resistive Memory with Improved Uniformity Achieved by the Thermal Annealing-Induced Self-Doping of Ge

Ge-based Non-Volatile Logic-Memory Hybrid Devices for NAND Memory Application

(Invited) BEOL-Compatible Oxide Semiconductor Logic and Memory Devices

Counteractive Coupling IGZO/CNT Hybrid 2T0C DRAM Accelerating RRAM-based Computing-In-Memory Via Monolithic 3D Integration for Edge AI

Monolithic 3-D Integration of Counteractive Coupling IGZO/CNT Hybrid 2T0C DRAM and Analog RRAM-Based Computing-In-Memory

Monolithic 3D Integration of FeFET, Hybrid CMOS Logic and Analog RRAM Array for Energy-Efficient Reconfigurable Computing-In-Memory Architecture.

All WSe2 1T1R resistive RAM cell for future monolithic 3D embedded memory integration

Ge-Based Asymmetric RRAM Enable 8F(2) Content Addressable Memory

Experimental Demonstration of Non-volatile Boolean Logic with Field Configurable 1Fefet-1Rram Technology

Ultralow Switching Voltage and Power Consumption of GeS2 Thin Film Resistive Switching Memory

Resistive Switching Behaviours and Novel Device Applications of Metal-Oxide-Si/Ge Structures

Reconfigurable Logic-Memory Hybrid Device Based on Ferroelectric Hf0.5Zr0.5O2

Logic-Based Mega-Bit CuxSiyO emRRAM with Excellent Scalability Down to 22nm Node for post-emFLASH SOC Era

Enabling Lower-Power Charge-Domain Nonvolatile In-Memory Computing with Ferroelectric FETs

A Logic-Process Compatible RRAM with 15.43 Mb/mm<sup>2</sup> Density and 10years@150°C retention using STI-less Dynamic-Gate and Self-Passivation Sidewall

Versatile Logic and Nonvolatile Memory Based on a Van Der Waals Heterojunction

3D Nano Hafnium‐Based Ferroelectric Memory Vertical Array for High‐Density and High‐Reliability Logic‐In‐Memory Application

Ferroelectric FETs-Based Nonvolatile Logic-in-Memory Circuits

Silicon–van der Waals heterointegration for CMOS-compatible logic-in-memory design

High Performance Si-MoS2 Heterogeneous Embedded DRAM