Abstract:Herein, a novel in-plane dual-axis micro-electro-mechanical system piezoresistive accelerometer was proposed based on theoretical and simulation analyses. Its self-support piezoresistive beam (SPB) possessed the features of force amplification and axial deformation to obtain high sensitivity. To clarify the influence of structural dimensions on the performance of the accelerometer and the pure axial-deformation condition of the SPB, a theoretical model was established to analyze mechanical behavior. The theoretical results were in well accordance with the simulation ones, displaying a maximum relative error of less than 10%. The theoretical and simulation results suggested that the accelerometer with thin and long support/hinge beams possesses a higher sensitivity but a lower frequency. However, the sensitivity and natural frequency increased simultaneously before the distance between SPB and support beam $D$ reached a certain value. The simulated longitudinal stress of SPB achieved the average value of 32.473 MPa, and the first-order natural frequency was nearly 13.6 kHz. Furthermore, the fabricated accelerometer was tested in a simple packaging case. The experimental results demonstrated that the proposed accelerometer had a measuring sensitivity of 0.198 mV/g/V with a maximum non-linearity of 1.00% FS and a resonant frequency of 12.93 kHz. The cross sensitivities were 11.93 and $15.97~\mu \text{V}$ /g/5V in the $y$ and $z$ axes, respectively, which were 1.21% and 1.61% of the prime-axis sensitivity. The zero offset with varying temperatures was 0.00296%/°C, and the zero drift in the long-term static stability test was 0.02 mV. All the results above revealed the promising application potential of the proposed accelerometer in vibration detection in the high-speed rotating spindle of machine tools. [2022-0057]

A Novel Electrodes Design for In-Plane Measurement of Single-Structure Multi-Axis MEMS Inertial Devices.

Design and Fabrication of a Miniature Four-Axial Piezoresistive Force/Torque Sensor with MEMS Technology

Design And Implementation Of A Novel Cmos-Mems Single Proof-Mass Tri-Axis Accelerometer

Design And Fabrication Of A Slanted-Beam Mems Accelerometer

A Novel Tri-Axial Piezoelectric MEMS Accelerometer with Folded Beams

Development of A Z-Axis Out of Plane MEMS Accelerometer

A MEMS Electrochemical Angular Accelerometer with Silicon-Based Four-Electrode Structure

A Two-Axis MEMS Piezoresistive In-Plane Accelerometer with Pure Axially Deformed Microbeams

A Novel Single-Axis MEMS Tilt Sensor with a High Sensitivity in the Measurement Range from 0∘ to 360∘

Modeling and Characterization of a Novel In-Plane Dual-Axis MEMS Accelerometer Based on Self-Support Piezoresistive Beam

A Novel Triaxial Micro Accelerometer

Fabrication and Characterization of Monolithic Integrated Three-Axis Acceleration/Pressure/Magnetic Field Sensors

Design of a Tri-Axial Surface Micromachined MEMS Vibrating Gyroscope

A Monolithic Inertial Measurement Unit Fabricated with Improved DRIE Post-Cmos Process

Implementation of A Monolithic Single Proof-Mass Tri-Axis Accelerometer Using Cmos-Mems Technique

A Novel Mems 3-Axis Thermal Accelerometer with 5-Wire Structure Using Planar Stacking Method

An electrothermal/electrostatic dual driven MEMS scanner with large in-plane and out-of-plane displacement

The Comb Electrode Dual-Axis Micromachined Accelerometer

A Novel Biaxial Resonant Micro Accelerometer with Microleverage Mechanism

A Three-Axis CMOS-MEMS Accelerometer Structure With Vertically Integrated Fully Differential Sensing Electrodes

Design and simulation of a novel MEMS-based single proof mass three-axis piezo-capacitive accelerometer