Abstract:Accelerometers are one of the most widely used sensors. They are essential in many applications such as inertial measurement units (IMUs), airbags safety systems, activity monitoring in biomedical applications, and vibration analysis of industrial machinery. Some of these applications may need high immunity to Electromagnetic Interference (EMI). Optical accelerometers can provide such an advantage and usually shows better sensitivity. However, most of the previous versions involved optical fibers, which hindered their monolithic microfabrication. The few optical accelerometers suited for mass production presented previously in literature suffered from some other drawbacks, besides measuring in one direction (1D) only. In this work, we present a novel optical accelerometer that enables measurements in 3D, besides facilitating monolithic fabrication and simple assembly. The operation principle is based on power modulation technique that does not need complicated processing and achieves real-time measurements. The device consists of a light-emitting diode (LED), a quadrant photodetector and a proof mass suspended between them by springs allowing it to move along the 3-axes. When the proof mass moves due to the applied acceleration, more light will pass to some panels of the quadrant detector while others will receive less light, according to the motion direction. The sensor design, implementation scheme, mechanical simulation and optical modeling are reported. COMSOL finite element analysis (FEA) simulation shows a mechanical sensitivity exceeding 3.7µm/G. The modeling for both mechanical, optical and electrical transductions shows a total sensitivity up to 100 µA/G. The mechanical part of the device is fabricated using the SOIMUMPs process.

Development of A Z-Axis Out of Plane MEMS Accelerometer

Monolithic Integrated Micro-Opto-Electromechanical Accelerometer Based on Michelson Interferometer Structure

Mechanical Design Optimization of A Single-Axis Moems Accelerometer Based on A Grating Interferometry Cavity for Ultrahigh Sensitivity

Design of Freeform Geometries in a MEMS Accelerometer with a Mechanical Motion Preamplifier Based on a Genetic Algorithm

A Novel Electrodes Design for In-Plane Measurement of Single-Structure Multi-Axis MEMS Inertial Devices.

Design And Validation Of The First Z-Axis Mems Accelerometer With In-Plane Readout

3-axis Capacitive Low-Gravity MEMS Accelerometer with Zero Cross-Axis Sensitivity in a Commercial Process

Design And Implementation Of A Novel Cmos-Mems Single Proof-Mass Tri-Axis Accelerometer

Design of a Tri-Axial Surface Micromachined MEMS Vibrating Gyroscope

Monolithic Cmos-Mems Pure Oxide Tri-Axis Accelerometers for Temperature Stabilization and Performance Enhancement

Tri-axial optical MEMS accelerometer enables monolithic fabrication

Implementation of A Monolithic Single Proof-Mass Tri-Axis Accelerometer Using Cmos-Mems Technique

Biaxial Angular Acceleration Sensor with Rotational-Symmetric Spiral Channels and MEMS Piezoresistive Cantilevers

Design and simulation of a novel MEMS-based single proof mass three-axis piezo-capacitive accelerometer

An Aluminum Nitride-Based Dual-Axis MEMS In-Plane Differential Resonant Accelerometer

Design, Modelling, and Simulation analysis of a Single Axis MEMS-based Capacitive Accelerometer

A Wafer Level Vacuum Encapsulated Capacitive Accelerometer Fabricated in an Unmodified Commercial MEMS Process

A MEMS-Based Electrochemical Angular Accelerometer With Integrated Plane Electrodes for Seismic Motion Monitoring

3-axis high Q MEMS accelerometer with simultaneous damping control

A Digital Interface ASIC for Triple-Axis MEMS Vibratory Gyroscopes

A 3-axis MEMS capacitive accelerometer free of cross axis sensitivity