Abstract:As a promising energy source, direct borohydride fuel cells (DBFCs) have attracted a lot of attention. Since the electrooxidation of BH4- always accompanies the hydrolysis reaction, the energy density of DBFCs is closely related to the composition and structure of the anode. The formation of hydrogen formed by the hydrolysis of BH4- and the high exothermic nature of the reaction, as well as the strong basicity of the fuel, bring strict demands for the stability of the anode. Consequently, the designation and fabrication of an ideal anode are effective routes to enhance the performance of DBFCs. By comprehensive consideration of convenience, the electric/thermal conductivity of the electrode, the diffusion of the reactants/products and the effective cost, the electroless plating method was adopted and a CoB anode was directly formed on a Ni-foam substrate. The anode showed high electrocatalytic activities from electrooxidation of NaBH4 with a low CoB loading amount. Especially, the anode showed distinct stability compared to the CoB plate prepared by the pressed method and the catalytic activity could retain 65% after an accelerated life time test of 500 cyclic voltammetry cycles, which was due to the strong interactions between the CoB particles and Ni-foam substrate. Among all the investigated anodes, the CoB/Ni-foam electroless anode deposited for 7 times showed the best performance. It was applied in a membraneless DBFC which showed a maximum power density of 230 mW cm(-2) in 1 mol L-1 NaBH4 + 3 mol L-1 NaOH at 313 K. These characteristics allowed the electroless plating CoB/Ni-foam catalyst to exhibit enormous potential as an anode for practical applications in DBFCs.

Influence of Operation Conditions on Direct NaBH_4/H_2O_2 Fuel Cell Performance

Performance improvement of a micro borohydride fuel cell operating at ambient conditions

Performance Degradation of A Direct Borohydride Fuel Cell

Electrocatalysts for the Anodic Oxidation of Borohydrides

Introducing Catalyst in Alkaline Membrane for Improved Performance Direct Borohydride Fuel Cells

Development of the direct borohydride fuel cell

Anodic Oxidation of Alkali Borohydrides Catalyzed by Nickel

Effects of NaOH Addition on Performance of the Direct Hydrazine Fuel Cell

Study of the electrooxidation of borohydride on a directly formed CoB/Ni-foam electrode and its application in membraneless direct borohydride fuel cells

A Study on Performance Stability of the Passive Direct Borohydride Fuel Cell

Development of high-performance planar borohydride fuel cell modules for portable applications

A Study of the Direct Dimethyl Ether Fuel Cell Using Alkaline Anolyte

The affects of membrane on the cell performance when using alkaline borohydride–hydrazine solutions as the fuel

Effects of hydrazine addition on gas evolution and performance of the direct borohydride fuel cell

Development of the Cathode Catalyst for Direct Borohydride Fuel Cell

Elementary Study of a Direct Borohydride/h2o2 Fuel Cell

Study on Direct Hydrazine Borane Fuel Cell Based on Anion Exchange Membrane

A Direct Borohydride Fuel Cell Using MnO2-catalyzed Cathode and Hydrogen Storage Alloy Anode

Boosting borohydride oxidation kinetics by manipulating hydrogen evolution and oxidation through octahedral Pt–Ni/C for high-performance direct borohydride fuel cells

Current status and progress of direct borohydride fuel cell technology development

Direct NaBH4–H2O2 Fuel Cell Based on Nanoporous Gold Leaves