Abstract:In this work, a direct ammonia fuel cell, which consists of an anion exchange membrane and commercially available PtRu/C and Pd/C catalysts at the anode and cathode, respectively, is developed. Experimental results demonstrate that the direct ammonia fuel cell exhibits a peak power density of 20.7 mW cm–2 and an open-circuit voltage of 0.67 V at 95 °C when fed with 3.0 M ammonia and 3.0 M KOH. Besides, the durability test results reveal that the developed direct ammonia fuel cell can maintain stable operation for more than 25 h. In addition, the effects of operating parameters, such as the concentrations of ammonia and KOH, flow rates of anolyte and oxygen, and operating temperatures on the cell performance, are experimentally examined. A higher KOH concentration is observed to increase the cell voltage by enhancing the kinetics of ammonia oxidation, which is facilitated by the higher concentration of OH– in the catalyst layer. However, increasing the KOH concentration leads to higher internal resistance in the cell as a result of the increased viscosity of the anolyte. Besides, the analysis of results suggests that a moderate flow rate of both anolyte and gaseous oxygen can also enhance the cell performance by reducing ammonia crossover and preventing membrane dehydration, respectively. Moreover, increasing the operating temperature of the cell also promotes the kinetics of the electrochemical reactions at the catalyst layers, which is also associated with an enhanced mass transfer within the electrodes. In summary, a direct ammonia fuel cell, using an anion exchange membrane, with relatively high performance has been developed. The study provides insights into the performance-enhancing strategies, via operating conditions, toward the further development of the cell.

Study on Direct Hydrazine Borane Fuel Cell Based on Anion Exchange Membrane

Bilayer Anion-Exchange Membrane with Low Borohydride Crossover and Improved Fuel Efficiency for Direct Borohdyride Fuel Cell.

Performance improvement of a micro borohydride fuel cell operating at ambient conditions

Introducing Catalyst in Alkaline Membrane for Improved Performance Direct Borohydride Fuel Cells

Polyvinyl Alcohol Anion Exchange Resin Composite Membrane with Co@Cu Core–Shell Particles for Direct Borohydride Fuel Cell Applications

Direct Hydrazine Borane Fuel Cell Using Non-noble Carbon Supported Polypyrrole Cobalt Hydroxide as Anode Catalyst

Effects of Hydrolysis Degree on Ion-Doped Anion Exchange Membranes in Direct Borohydride Fuel Cells

Functionalization of Polyvinyl Alcohol Composite Membrane by CoOOH for Direct Borohydride Fuel Cells

A Study of the Direct Dimethyl Ether Fuel Cell Using Alkaline Anolyte

A Development of Direct Hydrazine/Hydrogen Peroxide Fuel Cell

A highly stable Cu(OH)<sub>2</sub>-Poly(vinyl alcohol) nanocomposite membrane for dramatically enhanced direct borohydride fuel cell performance

Elementary Study of a Direct Borohydride/h2o2 Fuel Cell

Effects of hydrazine addition on gas evolution and performance of the direct borohydride fuel cell

Performance Degradation of A Direct Borohydride Fuel Cell

The affects of membrane on the cell performance when using alkaline borohydride–hydrazine solutions as the fuel

Hydrogen storage alloys as the anode materials of the direct borohydride fuel cell

A Fuel Cell Development for Using Borohydrides As the Fuel

Fabrication of an Anion Exchange Membrane with Textured Structure for Enhanced Performance of Direct Borohydride Fuel Cells.

Performance Characteristics of a Direct Ammonia Fuel Cell with an Anion Exchange Membrane

Carbon Supported Silver Nanowires with Enhanced Catalytic Activity and Stability Used As A Cathode in A Direct Borohydride Fuel Cell

Study of the electrooxidation of borohydride on a directly formed CoB/Ni-foam electrode and its application in membraneless direct borohydride fuel cells