Abstract:As a promising energy source, direct borohydride fuel cells (DBFCs) have attracted a lot of attention. Since the electrooxidation of BH4- always accompanies the hydrolysis reaction, the energy density of DBFCs is closely related to the composition and structure of the anode. The formation of hydrogen formed by the hydrolysis of BH4- and the high exothermic nature of the reaction, as well as the strong basicity of the fuel, bring strict demands for the stability of the anode. Consequently, the designation and fabrication of an ideal anode are effective routes to enhance the performance of DBFCs. By comprehensive consideration of convenience, the electric/thermal conductivity of the electrode, the diffusion of the reactants/products and the effective cost, the electroless plating method was adopted and a CoB anode was directly formed on a Ni-foam substrate. The anode showed high electrocatalytic activities from electrooxidation of NaBH4 with a low CoB loading amount. Especially, the anode showed distinct stability compared to the CoB plate prepared by the pressed method and the catalytic activity could retain 65% after an accelerated life time test of 500 cyclic voltammetry cycles, which was due to the strong interactions between the CoB particles and Ni-foam substrate. Among all the investigated anodes, the CoB/Ni-foam electroless anode deposited for 7 times showed the best performance. It was applied in a membraneless DBFC which showed a maximum power density of 230 mW cm(-2) in 1 mol L-1 NaBH4 + 3 mol L-1 NaOH at 313 K. These characteristics allowed the electroless plating CoB/Ni-foam catalyst to exhibit enormous potential as an anode for practical applications in DBFCs.

Elementary Study of a Direct Borohydride/h2o2 Fuel Cell

A simple and easy one-step fabrication of thin BaZr0.1Ce0.7Y0.2O3−δ electrolyte membrane for solid oxide fuel cells

Performance improvement of a micro borohydride fuel cell operating at ambient conditions

Introducing Catalyst in Alkaline Membrane for Improved Performance Direct Borohydride Fuel Cells

A Development of Direct Hydrazine/Hydrogen Peroxide Fuel Cell

Bilayer Anion-Exchange Membrane with Low Borohydride Crossover and Improved Fuel Efficiency for Direct Borohdyride Fuel Cell.

A Fuel Cell Development for Using Borohydrides As the Fuel

Study on Direct Hydrazine Borane Fuel Cell Based on Anion Exchange Membrane

A Study of the Direct Dimethyl Ether Fuel Cell Using Alkaline Anolyte

Functionalization of Polyvinyl Alcohol Composite Membrane by CoOOH for Direct Borohydride Fuel Cells

Performance Degradation of A Direct Borohydride Fuel Cell

Influence of Operation Conditions on Direct NaBH_4/H_2O_2 Fuel Cell Performance

A Study on Performance Stability of the Passive Direct Borohydride Fuel Cell

Preliminary Study on Direct Ethanol Fuel Cell

Performance of a Direct Methanol Fuel Cell

Polyvinyl Alcohol Anion Exchange Resin Composite Membrane with Co@Cu Core–Shell Particles for Direct Borohydride Fuel Cell Applications

Development of high-performance planar borohydride fuel cell modules for portable applications

Electrocatalysts for the Anodic Oxidation of Borohydrides

A highly stable Cu(OH)<sub>2</sub>-Poly(vinyl alcohol) nanocomposite membrane for dramatically enhanced direct borohydride fuel cell performance

Fabrication of an Anion Exchange Membrane with Textured Structure for Enhanced Performance of Direct Borohydride Fuel Cells.

Study of the electrooxidation of borohydride on a directly formed CoB/Ni-foam electrode and its application in membraneless direct borohydride fuel cells