Abstract:As a promising energy source, direct borohydride fuel cells (DBFCs) have attracted a lot of attention. Since the electrooxidation of BH4- always accompanies the hydrolysis reaction, the energy density of DBFCs is closely related to the composition and structure of the anode. The formation of hydrogen formed by the hydrolysis of BH4- and the high exothermic nature of the reaction, as well as the strong basicity of the fuel, bring strict demands for the stability of the anode. Consequently, the designation and fabrication of an ideal anode are effective routes to enhance the performance of DBFCs. By comprehensive consideration of convenience, the electric/thermal conductivity of the electrode, the diffusion of the reactants/products and the effective cost, the electroless plating method was adopted and a CoB anode was directly formed on a Ni-foam substrate. The anode showed high electrocatalytic activities from electrooxidation of NaBH4 with a low CoB loading amount. Especially, the anode showed distinct stability compared to the CoB plate prepared by the pressed method and the catalytic activity could retain 65% after an accelerated life time test of 500 cyclic voltammetry cycles, which was due to the strong interactions between the CoB particles and Ni-foam substrate. Among all the investigated anodes, the CoB/Ni-foam electroless anode deposited for 7 times showed the best performance. It was applied in a membraneless DBFC which showed a maximum power density of 230 mW cm(-2) in 1 mol L-1 NaBH4 + 3 mol L-1 NaOH at 313 K. These characteristics allowed the electroless plating CoB/Ni-foam catalyst to exhibit enormous potential as an anode for practical applications in DBFCs.

A Study on Performance Stability of the Passive Direct Borohydride Fuel Cell

Performance Degradation of A Direct Borohydride Fuel Cell

Development of high-performance planar borohydride fuel cell modules for portable applications

Performance improvement of a micro borohydride fuel cell operating at ambient conditions

Hydrogen storage alloys as the anode materials of the direct borohydride fuel cell

Development of the Cathode Catalyst for Direct Borohydride Fuel Cell

Bilayer Anion-Exchange Membrane with Low Borohydride Crossover and Improved Fuel Efficiency for Direct Borohdyride Fuel Cell.

Influences of fuel crossover on cathode performance in a micro borohydride fuel cell

Electrocatalysts for the Anodic Oxidation of Borohydrides

Performance of a Direct Borohydride Fuel Cell Stack

Introducing Catalyst in Alkaline Membrane for Improved Performance Direct Borohydride Fuel Cells

Development of the direct borohydride fuel cell

FeS As a Promising Cathode Catalyst for Direct Borohydride Fuel Cells

Study of the electrooxidation of borohydride on a directly formed CoB/Ni-foam electrode and its application in membraneless direct borohydride fuel cells

Current status and progress of direct borohydride fuel cell technology development

Investigation of non-precious metal cathode catalysts for direct borohydride fuel cells

A Fuel Cell Development for Using Borohydrides As the Fuel

Ethylene-vinyl acetate binder-based carbon-supported Pt Anode empowered by potassium borohydride fuel for direct borohydride fuel cells: defining strategies to achieve ambient long-endurance performance

Depression of Hydrogen Evolution During Operation of A Direct Borohydride Fuel Cell

Influences of hydrogen evolution on the cell and stack performances of the direct borohydride fuel cell

Boosting borohydride oxidation kinetics by manipulating hydrogen evolution and oxidation through octahedral Pt–Ni/C for high-performance direct borohydride fuel cells