Abstract:A catalytic material is introduced into the polymer matrix to prepare a novel polymeric alkaline electrolyte membrane (AEM) which simultaneously increases ionic conductivity, reduces the fuel cross-over. In this work, the hydroxide anion exchange membrane is mainly composed of poly(vinylalcohol) and alkaline exchange resin. CoCl2 is added into the poly(vinylalcohol) and alkaline exchange resin gel before casting the membrane to introduce catalytic materials. CoCl2 is converted into CoOOH after the reaction with KOH solution. The crystallinity of the polymer matrix decreases and the ionic conductivity of the composite membrane is notably improved by the introduction of Co-species. A direct borohydride fuel cell using the composite membrane exhibits an open circuit voltage of 1.11 V at 30 degrees C, which is notably higher than that of cells using other AEMs. The cell using the composite membrane achieves a maximum power density of 283 mW cm(-2) at 60 degrees C while the cell using the membrane without Co-species only reaches 117 mW cm(-2) at the same conditions. The outstanding performance of the cell using the composite membrane benefits from impregnation of the catalytic Co-species in the membrane, which not only increases the ionic conductivity but also reduces electrode polarization thus improves the fuel cell performance. This work provides a new approach to develop high-performance fuel cells through adding catalysts in the electrolyte membrane.

A Fuel Cell Development for Using Borohydrides As the Fuel

An ammonia fuelled SOFC with a BaCe0.9Nd0.1O3-δ thin electrolyte prepared with a suspension spray

Performance improvement of a micro borohydride fuel cell operating at ambient conditions

Electrocatalysts for the Anodic Oxidation of Borohydrides

Hydrogen storage alloys as the anode materials of the direct borohydride fuel cell

Anodic Oxidation of Alkali Borohydrides Catalyzed by Nickel

Development of the direct borohydride fuel cell

Solid sodium borohydride as a hydrogen source for fuel cells

Evaluation of Alkaline Borohydride Solutions As the Fuel for Fuel Cell

Development of high-performance planar borohydride fuel cell modules for portable applications

A Direct Borohydride Fuel Cell Using MnO2-catalyzed Cathode and Hydrogen Storage Alloy Anode

Bilayer Anion-Exchange Membrane with Low Borohydride Crossover and Improved Fuel Efficiency for Direct Borohdyride Fuel Cell.

Introducing Catalyst in Alkaline Membrane for Improved Performance Direct Borohydride Fuel Cells

A Study on Performance Stability of the Passive Direct Borohydride Fuel Cell

Carbon Supported Silver Nanowires with Enhanced Catalytic Activity and Stability Used As A Cathode in A Direct Borohydride Fuel Cell

Elementary Study of a Direct Borohydride/h2o2 Fuel Cell

Effects of hydrazine addition on gas evolution and performance of the direct borohydride fuel cell

Study on Direct Hydrazine Borane Fuel Cell Based on Anion Exchange Membrane

Performance Degradation of A Direct Borohydride Fuel Cell

Development of the Cathode Catalyst for Direct Borohydride Fuel Cell

Current status and progress of direct borohydride fuel cell technology development