Abstract:A catalytic material is introduced into the polymer matrix to prepare a novel polymeric alkaline electrolyte membrane (AEM) which simultaneously increases ionic conductivity, reduces the fuel cross-over. In this work, the hydroxide anion exchange membrane is mainly composed of poly(vinylalcohol) and alkaline exchange resin. CoCl2 is added into the poly(vinylalcohol) and alkaline exchange resin gel before casting the membrane to introduce catalytic materials. CoCl2 is converted into CoOOH after the reaction with KOH solution. The crystallinity of the polymer matrix decreases and the ionic conductivity of the composite membrane is notably improved by the introduction of Co-species. A direct borohydride fuel cell using the composite membrane exhibits an open circuit voltage of 1.11 V at 30 degrees C, which is notably higher than that of cells using other AEMs. The cell using the composite membrane achieves a maximum power density of 283 mW cm(-2) at 60 degrees C while the cell using the membrane without Co-species only reaches 117 mW cm(-2) at the same conditions. The outstanding performance of the cell using the composite membrane benefits from impregnation of the catalytic Co-species in the membrane, which not only increases the ionic conductivity but also reduces electrode polarization thus improves the fuel cell performance. This work provides a new approach to develop high-performance fuel cells through adding catalysts in the electrolyte membrane.

Effects of hydrazine addition on gas evolution and performance of the direct borohydride fuel cell

Effects of NaOH Addition on Performance of the Direct Hydrazine Fuel Cell

The affects of membrane on the cell performance when using alkaline borohydride–hydrazine solutions as the fuel

Hydrogen storage alloys as the anode materials of the direct borohydride fuel cell

Evaluation of Alkaline Borohydride Solutions As the Fuel for Fuel Cell

Performance improvement of a micro borohydride fuel cell operating at ambient conditions

A Fuel Cell Development for Using Borohydrides As the Fuel

Study on Direct Hydrazine Borane Fuel Cell Based on Anion Exchange Membrane

Carbon Supported Silver Nanowires with Enhanced Catalytic Activity and Stability Used As A Cathode in A Direct Borohydride Fuel Cell

Electrocatalysts for the Anodic Oxidation of Borohydrides

Solid sodium borohydride as a hydrogen source for fuel cells

Performance Degradation of A Direct Borohydride Fuel Cell

Anodic Oxidation of Alkali Borohydrides Catalyzed by Nickel

Influence of Operation Conditions on Direct NaBH_4/H_2O_2 Fuel Cell Performance

Introducing Catalyst in Alkaline Membrane for Improved Performance Direct Borohydride Fuel Cells

Depression of Hydrogen Evolution During Operation of A Direct Borohydride Fuel Cell

Direct Hydrazine Borane Fuel Cell Using Non-noble Carbon Supported Polypyrrole Cobalt Hydroxide as Anode Catalyst

Study on a Direct Hydrazine Borane Fuel Cell Based on an Anion Exchange Membrane

Direct Borohydride Fuel Cell Performance Using Hydroxide‐conducting Polymeric Nanocomposite Electrolytes

Current status and progress of direct borohydride fuel cell technology development

A Development of Direct Hydrazine/Hydrogen Peroxide Fuel Cell