Abstract:In this work, a direct ammonia fuel cell, which consists of an anion exchange membrane and commercially available PtRu/C and Pd/C catalysts at the anode and cathode, respectively, is developed. Experimental results demonstrate that the direct ammonia fuel cell exhibits a peak power density of 20.7 mW cm–2 and an open-circuit voltage of 0.67 V at 95 °C when fed with 3.0 M ammonia and 3.0 M KOH. Besides, the durability test results reveal that the developed direct ammonia fuel cell can maintain stable operation for more than 25 h. In addition, the effects of operating parameters, such as the concentrations of ammonia and KOH, flow rates of anolyte and oxygen, and operating temperatures on the cell performance, are experimentally examined. A higher KOH concentration is observed to increase the cell voltage by enhancing the kinetics of ammonia oxidation, which is facilitated by the higher concentration of OH– in the catalyst layer. However, increasing the KOH concentration leads to higher internal resistance in the cell as a result of the increased viscosity of the anolyte. Besides, the analysis of results suggests that a moderate flow rate of both anolyte and gaseous oxygen can also enhance the cell performance by reducing ammonia crossover and preventing membrane dehydration, respectively. Moreover, increasing the operating temperature of the cell also promotes the kinetics of the electrochemical reactions at the catalyst layers, which is also associated with an enhanced mass transfer within the electrodes. In summary, a direct ammonia fuel cell, using an anion exchange membrane, with relatively high performance has been developed. The study provides insights into the performance-enhancing strategies, via operating conditions, toward the further development of the cell.

Effects of NaOH Addition on Performance of the Direct Hydrazine Fuel Cell

Effects of hydrazine addition on gas evolution and performance of the direct borohydride fuel cell

A Study of the Direct Dimethyl Ether Fuel Cell Using Alkaline Anolyte

The affects of membrane on the cell performance when using alkaline borohydride–hydrazine solutions as the fuel

Effects of Hydrolysis Degree on Ion-Doped Anion Exchange Membranes in Direct Borohydride Fuel Cells

A Development of Direct Hydrazine/Hydrogen Peroxide Fuel Cell

Introducing Catalyst in Alkaline Membrane for Improved Performance Direct Borohydride Fuel Cells

Influence of Operation Conditions on Direct NaBH_4/H_2O_2 Fuel Cell Performance

Study on Direct Hydrazine Borane Fuel Cell Based on Anion Exchange Membrane

Evaluation of Alkaline Borohydride Solutions As the Fuel for Fuel Cell

Performance improvement of a micro borohydride fuel cell operating at ambient conditions

Hydrogen storage alloys as the anode materials of the direct borohydride fuel cell

Performance Characteristics of a Direct Ammonia Fuel Cell with an Anion Exchange Membrane

Performance of alkaline electrolyte-membrane-based direct ethanol fuel cells

Hierarchical layered double hydroxide coated carbon nanotube modified quaternized chitosan/polyvinyl alcohol for alkaline direct methanol fuel cells

Direct Borohydride Fuel Cell Performance Using Hydroxide‐conducting Polymeric Nanocomposite Electrolytes

Insight into interface behaviors to building a phase-boundary-matched Na-ion direct liquid fuel cell

Hydroxide Self-Feeding High-Temperature Alkaline Direct Formate Fuel Cells

Direct Hydrazine Borane Fuel Cell Using Non-noble Carbon Supported Polypyrrole Cobalt Hydroxide as Anode Catalyst

Study on a Direct Hydrazine Borane Fuel Cell Based on an Anion Exchange Membrane

Improved Performance of Ammonia-Fueled Solid Oxide Fuel Cell with Ssz Thin Film Electrolyte and Ni-Ssz Anode Functional Layer