Abstract:A quasi-continuous-wave (QCW) laser diode (LD) driver is commonly used to drive diode bars and stacks designed specifically for QCW operations in solid-state lasers. Such drivers are optimized to deliver peak current and voltage pulses to LDs while maintaining low average power levels. As a result, they are widely used in laser processing devices and laser instruments. Traditional high-energy QCW LD drivers primarily use capacitors as energy storage components and pulsed constant-current sources with op-amps and power metal-oxide-semiconductor field-effect transistors (MOSFETs) as their core circuits for generating repeated constant-current pulses. The drawback of this type of driver is that the driver's output voltage needs to be manually adjusted according to the operating voltage of the load before use to maximize driver efficiency while providing a sufficient current. Another drawback is its inability to automatically adjust the output voltage to maintain high efficiency when the load changes during the driver operation. Drastic changes in the load can cause the driver to fail to function properly in extreme cases. Based on the above traditional circuit structure, this study designed a stability compensation circuit and realized a QCW LD driver for driving a GS20 diode stack with a maximum repetition rate of 100 Hz, a constant current of approximately 300 A, a load voltage of approximately 10 V, and a pulse width of approximately 300 μs. In particular, a high-efficiency, load-adaptive driving method was used with the MOSFETs in the critical saturation region (i.e., between the linear and saturated regions), controlling its power loss effectively while achieving maximum output current of the driver. The experiments demonstrated that the driver efficiency could be maintained at more than 80% when the load current varied from 50 to 300 A.

Study of High Stable LD Driver for Low-Noise DPL Lasers

An Ultra-High Stability, Low-Noise Laser Current Driver with Digital Control

The Design and Implementation of a Low-Noise Diode Laser Drive Power

A Load-Adaptive Driving Method for a Quasi-Continuous-Wave Laser Diode

Design of LD Current Drivers of Pump-Modules in Fiber Amplifiers

A High-precision Laser Diode Driver for MDI-QKD System

Investigation of Output Nonlinearity Mechanisms in Gan-Based Blue Laser Diodes

Design and Implementation of a Power Semiconductor-Based Switching Mode Laser Diode Driver

Research on Degradation Characteristics of GaN-based LD

Stability improvement of high-power semiconductor laser diode regulators used in infrared solid-state laser applications

Double-control Driver in New Model of Acousto-optic Q-switched All-solid-state Green Laser

An Efficiency Improvement Driver for Master Oscillator Power Amplifier Pulsed Laser Systems

Modulated High Power and Narrow Pulse Width Laser Drive Circuit for Lidar System

A Fully-integrated GaN Driver for Time-of-flight Lidar Applications

Pulsed Power Modulated Driving Technology with High Output Power for Laser Fuze

The Design of a Laser Diode Pulsed Current Source Based on FPGA

A laser source driver in 0.18 <i></i>m SiGe BiCMOS technology for high speed quantum key distribution

Increasing Mode Instability Threshold by Mitigating Driver Noise in High Power Fiber Amplifiers

DC～3 Gb/s LD/EA Drivers Using Discrete Double Polysilicon Bipolar Transistors

A Kind of High Bit Rate Laser Diodes Driver

Study of Equivalent Circuit of GaN Based Laser Chip and Packaged Laser