Abstract:A quasi-continuous-wave (QCW) laser diode (LD) driver is commonly used to drive diode bars and stacks designed specifically for QCW operations in solid-state lasers. Such drivers are optimized to deliver peak current and voltage pulses to LDs while maintaining low average power levels. As a result, they are widely used in laser processing devices and laser instruments. Traditional high-energy QCW LD drivers primarily use capacitors as energy storage components and pulsed constant-current sources with op-amps and power metal-oxide-semiconductor field-effect transistors (MOSFETs) as their core circuits for generating repeated constant-current pulses. The drawback of this type of driver is that the driver's output voltage needs to be manually adjusted according to the operating voltage of the load before use to maximize driver efficiency while providing a sufficient current. Another drawback is its inability to automatically adjust the output voltage to maintain high efficiency when the load changes during the driver operation. Drastic changes in the load can cause the driver to fail to function properly in extreme cases. Based on the above traditional circuit structure, this study designed a stability compensation circuit and realized a QCW LD driver for driving a GS20 diode stack with a maximum repetition rate of 100 Hz, a constant current of approximately 300 A, a load voltage of approximately 10 V, and a pulse width of approximately 300 μs. In particular, a high-efficiency, load-adaptive driving method was used with the MOSFETs in the critical saturation region (i.e., between the linear and saturated regions), controlling its power loss effectively while achieving maximum output current of the driver. The experiments demonstrated that the driver efficiency could be maintained at more than 80% when the load current varied from 50 to 300 A.

The Design of a Laser Diode Pulsed Current Source Based on FPGA

Pulsed Driver Control System for High-Power LED

Design and Implementation of a Power Semiconductor-Based Switching Mode Laser Diode Driver

Design of Driving Circuit of LD Based On FPGA

A Novel Design of High Precision Driving System of Laser Diode for TDM-pumped Fiber Raman Amplifier

Design of A High Power Laser Diode Driver

Design of High Stability Digital Control Driving System for Semiconductor Laser

Design and implementation of numerical control laser driver circuit with large current and narrow pulse width

A Load-Adaptive Driving Method for a Quasi-Continuous-Wave Laser Diode

Design of LD Current Drivers of Pump-Modules in Fiber Amplifiers

Design of Constant Current Source of Semiconductor Laser Based on Single-chip Microcomputer

Design of A New-Style and High-Stability Ld Drive Power Supply

Design of pulsed laser diode drive power in laser fuze

Analysis and Design of the High-Power Laser Diode Drive Circuit Based on MAX797

Pulsed Power Modulated Driving Technology with High Output Power for Laser Fuze

Design of a New-Style LD Power Circuit

Design of High Current Nanosecond Pulsed Driving Circuit for LD

Design of Narrow pulse and High current LED Strobe Light Based on FPGA Platform

Design of a Digital Control Laser Driving Source Based on Dual Feedback Theory

A 155 Mbps Laser Diode Driver with Automatic Power and Extinction Ratio Control

Design of Pulse Power Supply for High-Power Semiconductor Laser Diode Arrays