Abstract:We investigate the architecture of microfabricated vapor cells with reflective sidewalls for applications in chip scale atomic sensors. The optical configuration in operation is suitable for both one-beam and two-beam (pump & probe) schemes. In the miniaturized vapor cells, the laser beam is reflected twice by the aluminum reflectors on the wet etched 54.7° sidewalls to prolong the optical length significantly, thus resulting in a return reflectance that is three times that of bare silicon sidewalls. To avoid limitations faced in the fabrication process, a simpler, more universal and less constrained fabrication process of microfabricated vapor cells for chip scale atomic sensors with uncompromised performance is implemented, which also decreases the fabrication costs and procedures. Characterization measurements show that with effective sidewall reflectors, mm3 level volume and feasible hermeticity, the elongated miniature vapor cells demonstrate a linear absorption contrast improvement by 10 times over the conventional micro-electro-mechanical system (MEMS) vapor cells at ~50 °C in the rubidium D1 absorption spectroscopy experiments. At the operating temperature of ~90 °C for chip scale atomic sensors, a 50% linear absorption contrast enhancement is obtained with the reflective cell architecture. This leads to a potential improvement in the clock stability and magnetometer sensitivity. Besides, the coherent population trapping spectroscopy is applied to characterize the microfabricated vacuum cells with 46.3 kHz linewidth in the through cell configuration, demonstrating the effectiveness in chip scale atomic sensors.

Microfabrication of <sup>85</sup>rb Vapor Cell for Chip-Scale Atomic Clocks

Microfabrication Of Rb-85 Vapor Cell For Chip-Scale Atomic Clocks

Stable Rb-85 micro vapour cells: fabrication based on anodic bonding and application in chip-scale atomic clocks

Microfabrication and Measurement of Rb-Ne Microcell for Chip-Scale Atomic Clocks

Micro Rb atomic vapor cells for the chip-scale atomic clock

A reflection-type vapor cell using anisotropic etching of silicon for micro atomic clocks

Microfabrication of MEMS Alkali Metal Vapor Cells for Chip-Scale Atomic Devices

Fabrication and Study of Micro Alkali-Metal Vapor Cell Applied to Chip Scale Atomic Clock

Microfabricated Vapor Cells with Reflective Sidewalls for Chip Scale Atomic Sensors

Thermal Management of Microfabricated Vapor Cells for Chip Scale Atomic Clocks

A (85)rb Coherent Population Trapping Atomic Clock

Single-step alkaline etching of deep silicon cavities for chip-scale atomic clock technology

Micro-fabrication and hermeticity measurement of alkali-atom vapor cells based on anodic bonding

Imaging Microwave and DC Magnetic Fields in a Vapor-Cell Rb Atomic Clock

Long-Term Stability Analysis Toward <10−14 Level for a Highly Compact POP Rb Cell Atomic Clock

A chip-scale atomic beam clock

Wafer-Level Filling of MEMS Vapor Cells Based on Chemical Reaction and Evaporation

An optical atomic clock using $4D_J$ states of rubidium

Reduction of helium permeation in microfabricated cells using aluminosilicate glass substrates and Al$_2$O$_3$ coatings

Rubidium chip-scale atomic clock with improved long-term stability through light intensity optimization and compensation for laser frequency detuning

Research Progress of Atom Vapor Cell for Chip-Scale Atomic Clock

Microfabrication of &lt;sup&gt;85&lt;/sup&gt;rb Vapor Cell for Chip-Scale Atomic Clocks