Long-Term Stability Analysis Toward <10−14 Level for a Highly Compact POP Rb Cell Atomic Clock

W. Moreno,C. Affolderbach,N. Almat,G. Mileti,F. Gruet,M. Gharavipour

DOI: https://doi.org/10.1109/TUFFC.2019.2940903

2020-01-01

Abstract:Long-term frequency instabilities in vapor-cell clocks mainly arise from fluctuations of the experimental and environmental parameters that are converted to clock frequency fluctuations via various physical processes. Here, we discuss the frequency sensitivities and the resulting stability limitations at one-day timescale for a rubidium vapor-cell clock based on a compact magnetron-type cavity operated in air (no vacuum environment). Under ambient laboratory conditions, the external atmospheric pressure fluctuations may dominantly limit the clock stability via the barometric effect. We establish a complete long-term instability budget for our clock operated under stable pressure conditions. Where possible, the fluctuations of experimental parameters are measured via the atomic response. The measured clock instability of <inline-formula> <tex-math notation="LaTeX">$ < 2\times 10^{-14}$ </tex-math></inline-formula> at one day is limited by the intensity light-shift effect, which could further be reduced by active stabilization of the laser intensity or stronger optical pumping. The analyses reported here show the way toward simple, compact, and low-power vapor-cell atomic clocks with excellent long-term stabilities <inline-formula> <tex-math notation="LaTeX">$\le 10^{-14}$ </tex-math></inline-formula> at one day when operated in ambient laboratory conditions.

Medicine,Physics

What problem does this paper attempt to address?

This paper aims to solve the problem of the long - term stability of rubidium atomic clocks, especially how to achieve long - term frequency stability at the level of less than 10$^{-14}$. The paper mainly discusses the frequency sensitivity of rubidium vapor cell clocks on a one - day time scale and the resulting stability limitations, especially when operating in a compact magnetron cavity (without a vacuum environment). The study points out that under laboratory conditions, external atmospheric pressure fluctuations may significantly limit the stability of the clock through the barometric effect. The author established a complete long - term instability budget for the clock operating under stable pressure conditions and measured the fluctuations of experimental parameters through atomic response as much as possible. The measured instability of the clock reported in the paper within one day is less than 2×10$^{-14}$, and this limitation is mainly due to the light - shift effect, which can be further reduced by actively stabilizing the laser intensity or enhancing optical pumping. In addition, the paper also analyzes other factors that may affect the stability of the clock, such as the microwave power shift effect, the light - shift effect, the second - order Zeeman effect, the temperature coefficient caused by buffer gas, and the cavity - pulling effect, etc., providing a guiding direction for realizing a simple, compact, low - power - consumption rubidium vapor cell clock with excellent long - term stability.

Long-Term Stability Analysis Toward <10−14 Level for a Highly Compact POP Rb Cell Atomic Clock

Short-term stability of a microcell optical reference based on Rb atom two-photon transition at 778 nm

Integrated pulsed optically pumped Rb atomic clock with frequency stability of

A pulsed optically pumped Rb clock with a frequency stability below 10-15

A Compact Laser System for the Pulsed Optically Pumped Rubidium Cell Atomic Clock

Laser with 10-13 Short-Term Instability for Compact Optically Pumped Cesium Beam Atomic Clock.

Rubidium chip-scale atomic clock with improved long-term stability through light intensity optimization and compensation for laser frequency detuning

A 44-cm3 physics package for the high-performance pulsed optically pumped atomic clock

Micro Rb atomic vapor cells for the chip-scale atomic clock

Frequency Stability of Atomic Clocks Based on Coherent Population Trapping Resonance in 85 Rb

Compact Optically Pumped Cesium Beam Atomic Clock with a 5-Day Frequency Stability of 7×10−15

Ytterbium optical lattice clock with instability of order 10<SUP>-18</SUP>

Improvement of the Short- and Long-Term Stability of High Performance Portable Optically Pumped Cesium Beam Atomic Clock

Operation of an optical atomic clock with a Brillouin laser subsystem

Stable Rb-85 micro vapour cells: fabrication based on anodic bonding and application in chip-scale atomic clocks

Realization of a Rubidium Atomic Frequency Standard With Short-Term Stability in 10 −14 τ −1/2 Level

Microfabrication of <sup>85</sup>rb Vapor Cell for Chip-Scale Atomic Clocks

Laser Frequency Stabilization Using Light Shift in Compact Atomic Clocks

Light shift mitigation in microcell-based coherent-population-trapping atomic clocks in the field of two circularly polarized light beams

A frequency shift compensation method for light shift and vapor-cell temperature shift in atomic clocks

An optical atomic clock using $4D_J$ states of rubidium

Long-Term Stability Analysis Toward <10−14 Level for a Highly Compact POP Rb Cell Atomic Clock

Short-term stability of a microcell optical reference based on Rb atom two-photon transition at 778 nm

Integrated pulsed optically pumped Rb atomic clock with frequency stability of

A pulsed optically pumped Rb clock with a frequency stability below 10-15

A Compact Laser System for the Pulsed Optically Pumped Rubidium Cell Atomic Clock

Laser with 10-13 Short-Term Instability for Compact Optically Pumped Cesium Beam Atomic Clock.

Rubidium chip-scale atomic clock with improved long-term stability through light intensity optimization and compensation for laser frequency detuning

A 44-cm3 physics package for the high-performance pulsed optically pumped atomic clock

Micro Rb atomic vapor cells for the chip-scale atomic clock

Frequency Stability of Atomic Clocks Based on Coherent Population Trapping Resonance in 85 Rb

Compact Optically Pumped Cesium Beam Atomic Clock with a 5-Day Frequency Stability of 7×10−15

Ytterbium optical lattice clock with instability of order 10<SUP>-18</SUP>

Improvement of the Short- and Long-Term Stability of High Performance Portable Optically Pumped Cesium Beam Atomic Clock

Operation of an optical atomic clock with a Brillouin laser subsystem

Stable Rb-85 micro vapour cells: fabrication based on anodic bonding and application in chip-scale atomic clocks

Realization of a Rubidium Atomic Frequency Standard With Short-Term Stability in 10 −14 τ −1/2 Level

Microfabrication of &lt;sup&gt;85&lt;/sup&gt;rb Vapor Cell for Chip-Scale Atomic Clocks

Laser Frequency Stabilization Using Light Shift in Compact Atomic Clocks

Light shift mitigation in microcell-based coherent-population-trapping atomic clocks in the field of two circularly polarized light beams

A frequency shift compensation method for light shift and vapor-cell temperature shift in atomic clocks

An optical atomic clock using $4D_J$ states of rubidium

Microfabrication of <sup>85</sup>rb Vapor Cell for Chip-Scale Atomic Clocks