Abstract:As a cutting-edge heat-to-electricity technology, thermogalvanic cells (thermocells) have great prospects in low-grade heat recovery due to its high Seebeck coefficient (Se), high scalability and low cost. Most of previous studies about aqueous thermocells have been focused on the overall performance by experimentally exploring advanced electrode and electrolyte materials, while very few simulation studies were reported before, leading to the unclear mechanisms of heat and ion transport inside the thermocell. In view of these challenges, this study aims to reveal the heat and ion transport characteristics of aqueous thermocells under various critical operating parameters, providing theoretical guidelines for further design and optimization of aqueous thermocells with fixed electrode and electrolyte materials. Firstly, a multi-physical model considering the diffusion, migration and convection was established and validated. Then, the effects of hot electrode temperature, electrode spacing and electrode orientation were evaluated on the thermocell performance from the aspects of distributions of multi-physical fields, overpotentials and overall performance. Finally, a prototype aqueous thermocell was proposed based on the understandings of restrictions associated with these operating parameters. Results indicated that each operating parameter can attribute to the variation of natural convection from the intensity and forms, and then affected the ion transport flux and overpotentials, and thus determined the power density of thermocells. These findings prompted the design and optimization of new aqueous thermocells, and the proposed prototype thermocell delivered the maximum power density of 0.43 W/m2, which was 115 % higher than that of the basic rectangular thermocell.

Thermal Management of Microfabricated Vapor Cells for Chip Scale Atomic Clocks

Advancing Cryogenic Electronic Cooling: A Case Study on Embedded Manifold Microchannels in Micromachined Joule-Thomson Coolers

Microfabricated Vapor Cells with Reflective Sidewalls for Chip Scale Atomic Sensors

Micro Rb atomic vapor cells for the chip-scale atomic clock

Self-adaptive Passive Temperature Management for Silicon Chips Based on Near-Field Thermal Radiation

Numerical Study on Heat and Ion Transport Characteristics Enables Optimal Design of Aqueous Thermocells for Low-Grade Heat Recovery

Research Progress of Atom Vapor Cell for Chip-Scale Atomic Clock

Fabrication and Study of Micro Alkali-Metal Vapor Cell Applied to Chip Scale Atomic Clock

Microfluid oscillator based on thermo-capillarity

Microfabrication of <sup>85</sup>rb Vapor Cell for Chip-Scale Atomic Clocks

Stable Rb-85 micro vapour cells: fabrication based on anodic bonding and application in chip-scale atomic clocks

Microfabrication Of Rb-85 Vapor Cell For Chip-Scale Atomic Clocks

Investigation on Spin Relaxation of Microfabricated Vapor Cells with Buffer Gas

Microfabrication of MEMS Alkali Metal Vapor Cells for Chip-Scale Atomic Devices

Microfabrication and Measurement of Rb-Ne Microcell for Chip-Scale Atomic Clocks

Numerical Simulation and Experimental Verification of Dynamic Cooling and Temperature Control of the Optical Cavity in a Co2 Isotope Analyzer

Thermal Analysis of Injectable, Cellular-Scale Optoelectronics with Pulsed Power

Wafer-Level Filling of MEMS Vapor Cells Based on Chemical Reaction and Evaporation

A reflection-type vapor cell using anisotropic etching of silicon for micro atomic clocks

Design and analysis of high-temperature operating 795?nm VCSELs for chip-scale atomic clocks

Characterization of 87Rb MEMS vapor cells for miniature atomic magnetometers