Abstract:We investigate the architecture of microfabricated vapor cells with reflective sidewalls for applications in chip scale atomic sensors. The optical configuration in operation is suitable for both one-beam and two-beam (pump & probe) schemes. In the miniaturized vapor cells, the laser beam is reflected twice by the aluminum reflectors on the wet etched 54.7° sidewalls to prolong the optical length significantly, thus resulting in a return reflectance that is three times that of bare silicon sidewalls. To avoid limitations faced in the fabrication process, a simpler, more universal and less constrained fabrication process of microfabricated vapor cells for chip scale atomic sensors with uncompromised performance is implemented, which also decreases the fabrication costs and procedures. Characterization measurements show that with effective sidewall reflectors, mm3 level volume and feasible hermeticity, the elongated miniature vapor cells demonstrate a linear absorption contrast improvement by 10 times over the conventional micro-electro-mechanical system (MEMS) vapor cells at ~50 °C in the rubidium D1 absorption spectroscopy experiments. At the operating temperature of ~90 °C for chip scale atomic sensors, a 50% linear absorption contrast enhancement is obtained with the reflective cell architecture. This leads to a potential improvement in the clock stability and magnetometer sensitivity. Besides, the coherent population trapping spectroscopy is applied to characterize the microfabricated vacuum cells with 46.3 kHz linewidth in the through cell configuration, demonstrating the effectiveness in chip scale atomic sensors.

Micro-fabrication and hermeticity measurement of alkali-atom vapor cells based on anodic bonding

Microfabrication of MEMS Alkali Metal Vapor Cells for Chip-Scale Atomic Devices

Microfabricated Vapor Cells with Chemical Polishing and Two-Step Low-Temperature Anodic Bonding for Single-Beam Magnetometer

Plasma-activated High-Strength Non-Isothermal Anodic Bonding for Efficient Fabrication of the Micro Atomic Vapor Cells

Influence of Architecture and Temperature of Alkali Atom Vapor Cells on Absorption Spectra

Micro-fabricated Alkali Vapor Cells Sealed at Low Temperature Using Asymmetric Au–In Transient Liquid Phase (TLP) Bonding

Atomic vapor cell fabrication for atomic clock based on vacuum packaging by multi-stack anodic bonding using two electrodes

Wafer-Level Hermetic All-Glass Packaging for Microalkali Vapor Cells of Chip-Scale Atomic Devices

Micro-fabricated alkali vapor cells for atomic spin gyroscope study

Wafer-level vapor cells filled with laser-actuated hermetic seals for integrated atomic devices

Microfabricated Bubble-in-Bubble Alkali Vapor Cell for 3-D Atomic Sensors

Wafer-scale fabrication of evacuated alkali vapor cells

Fabrication of low cost spherical alkali atom vapor cells by combining a low temperature anodic bonding and a Chemical Foaming Process (CFP)

Fabrication Ofhermetic CellUsingMEMS Technology

Fabrication of Hermetic Cell Using MEMS Technology

Microfabricated Vapor Cells with Reflective Sidewalls for Chip Scale Atomic Sensors

Laser-actuated hermetic seals for integrated atomic devices

Wafer-Level Micro Alkali Vapor Cells with Anti-Relaxation Coating Compatible with MEMS Packaging for Chip-Scale Atomic Magnetometers

Microfabricated Atomic Vapor Cells with Multi-Optical Channels Based on an Innovative Inner-Sidewall Molding Process

Microfabricated Low Cost Wafer-Level Spherical Alkali Atom Vapor Cells for Chip-Scale Atomic Clock by a Chemical Foaming Process (CFP)

Micro-machined deep silicon atomic vapor cells