Abstract:SOFC solid electrolytes are known for their ionic conductivity characteristics, which increase with increasing SOFC operating temperature. Using COMSOL Multiphysics numerical simulation, analysis of SOFC power performance with yttria-stabilized zirconia (YSZ) and lithium sodium carbonate – gadolinium-doped ceria ({LiNa}2CO3-GDC) electrolytes was conducted to determine the potential of these electrolytes in their application in SOFC. The ionic conductivity of YSZ was differentiated based on the mole value of the yttria content, namely 8, 8.95, 10 and 11.54 mol. Meanwhile, GDC varied based on the (LiNa)2CO3 content such as 7.8, 10, 16.8 and 30 %. With the numerical model, the calculation error is an average of 7.32 % and 6.89 % for the experimental power and voltage values. In SOFC with the YSZ electrolyte, it was found that the power output can increase 26.4–35 times with an increase in operating temperature from 500 °C to 750 °C. SOFC with 8YSZ can produce the highest power compared to other YSZ, which is 123 A/m2 at a current of 198 A/m2 with an operating temperature of 500 °C and 3,440 A/m2 at a current of 5,549 A/m2 with an operating temperature of 750 °C. Whereas in SOFC with the GDC electrolyte, it was found that the power output can increase 18.6–22.6 times with an increase in operating temperature from 500 °C to 750 °C. SOFC with 30 % (LiNa)2CO3-GDC produced the highest power compared to other GDC, which is 231 A/m2 at a current of 444 A/m2 with an operating temperature of 500 °C and 5,240 A/m2 at a current of 10,077 A/m2 with an operating temperature of 750 °C. YSZ also showed the potential for an increase in power output as the SOFC temperature increases above 750 °C, while the 30 % variation (LiNa)2CO3-GDC shows a limited increase in ionic conductivity at 750 °C

Effect of Y/Mg Ion Ratio and Phase Assemble on Ionic Conductivity of Multi-Doped Zirconia Ceramic Solid Electrolytes

Properties of Yttria Doped Zirconia Electrolyte with Li2O Additive

Enhancing sintering behavior and conductivity of YSZ electrolyte by co-doping of ZnO and MnO 2

Ternary co-doped ytterbium-scandium stabilized zirconia electrolyte for solid oxide fuel cells

Sintering Composite Electrolytes of Yttria-Doped Bismuth Oxide and Yttria-Stabilized Zirconia for Solid Oxide Fuel Cells

Study on the Properties of Ysz Electrolyte Made by Plaster Casting Method and the Applications in Solid Oxide Fuel Cells

Enhancement of the ionic conductivity of mixed calcia/yttria stabilized zirconia

Theoretical Aspects on Doped-Zirconia for Solid Oxide Fuel Cells: from Structure to Conductivity

Study on the properties of Al2O3-doped (ZrO2)0.92(Y2O3)0.08 electrolyte

Ionic Conductivity of Electrolytes Composed of Oleate-Capped Yttria-Stabilized Zirconia Nanoparticles

Analysis of the effect of ionic conductivity of electrolyte materials on the solid oxide fuel cell performance

Fabrication, Microstructure and Properties of A Ysz Electrolyte for Sofcs

Influence of Y2O3 Doping on Phase Evolution and Dielectric Characteristics of ZrO2 Ceramics

Enhanced Ionic Conductivity in Phase Stabilized Yttria-Doped Zirconia Nanowires

Synthesis and Characterization of Gadolinium-Doped Zirconia as a Potential Electrolyte for Solid Oxide Fuel Cells

Influence of Zn-doping on low-temperature sintering ability and electrical conductivity of YCrO3-based ceramic interconnect materials

Influence of Through-Lamella Grain Growth on Ionic Conductivity of Plasma-Sprayed Yttria-Stabilized Zirconia As an Electrolyte in Solid Oxide Fuel Cells

The Propertied Of Ysz Electrolyte Sintering At 1300 Degrees Enc

Interdiffusion between gadolinia doped ceria and yttria stabilized zirconia in solid oxide fuel cells: Experimental investigation and kinetic modeling

High-Temperature Mechanical–Conductive Behaviors of Proton-Conducting Ceramic Electrolytes in Solid Oxide Fuel Cells

The Properties of YSZ Electrolyte Sintering at 1300 °C