Abstract:SOFC solid electrolytes are known for their ionic conductivity characteristics, which increase with increasing SOFC operating temperature. Using COMSOL Multiphysics numerical simulation, analysis of SOFC power performance with yttria-stabilized zirconia (YSZ) and lithium sodium carbonate – gadolinium-doped ceria ({LiNa}2CO3-GDC) electrolytes was conducted to determine the potential of these electrolytes in their application in SOFC. The ionic conductivity of YSZ was differentiated based on the mole value of the yttria content, namely 8, 8.95, 10 and 11.54 mol. Meanwhile, GDC varied based on the (LiNa)2CO3 content such as 7.8, 10, 16.8 and 30 %. With the numerical model, the calculation error is an average of 7.32 % and 6.89 % for the experimental power and voltage values. In SOFC with the YSZ electrolyte, it was found that the power output can increase 26.4–35 times with an increase in operating temperature from 500 °C to 750 °C. SOFC with 8YSZ can produce the highest power compared to other YSZ, which is 123 A/m2 at a current of 198 A/m2 with an operating temperature of 500 °C and 3,440 A/m2 at a current of 5,549 A/m2 with an operating temperature of 750 °C. Whereas in SOFC with the GDC electrolyte, it was found that the power output can increase 18.6–22.6 times with an increase in operating temperature from 500 °C to 750 °C. SOFC with 30 % (LiNa)2CO3-GDC produced the highest power compared to other GDC, which is 231 A/m2 at a current of 444 A/m2 with an operating temperature of 500 °C and 5,240 A/m2 at a current of 10,077 A/m2 with an operating temperature of 750 °C. YSZ also showed the potential for an increase in power output as the SOFC temperature increases above 750 °C, while the 30 % variation (LiNa)2CO3-GDC shows a limited increase in ionic conductivity at 750 °C

Ionic Conductivity of Electrolytes Composed of Oleate-Capped Yttria-Stabilized Zirconia Nanoparticles

YSZ Thin Films Prepared by a Novel Powder Coating Process on Porous NiO-YSZ Cermet

Nanocrystal Engineering of Thin-Film Yttria-Stabilized Zirconia Electrolytes for Low-Temperature Solid-Oxide Fuel Cells

Fabrication of nanoscale yttria stabilized zirconia for solid oxide fuel cell

Enhanced Ionic Conductivity in Phase Stabilized Yttria-Doped Zirconia Nanowires

Fabrication, Microstructure and Properties of A Ysz Electrolyte for Sofcs

Properties of Yttria Doped Zirconia Electrolyte with Li2O Additive

Preparation of Bi2O3-YSZ and YSB-YSZ Composite Powders by a Microemulsion Method and Their Performance as Electrolytes in a Solid Oxide Fuel Cell

Research on Sintering Process of YSZ Electrolyte

Fabrication and Characterizations of Ysz Electrolyte Films for Sofc

Theoretical Aspects on Doped-Zirconia for Solid Oxide Fuel Cells: from Structure to Conductivity

3D Printing of Robust 8YSZ Electrolytes with a Hyperfine Structure for Solid Oxide Fuel Cells

Efficiently enhance the proton conductivity of YSZ-based electrolyte for low temperature solid oxide fuel cell

Yb2o3 Doped Zr0.92y0.08o2-(8ysz) And Its Composite Electrolyte For Intermediate Temperature Solid Oxide Fuel Cells

Efficient strategy to boost the electrochemical performance of yttrium stabilized zirconia electrolyte solid oxide fuel cell for low-temperature applications

The Propertied Of Ysz Electrolyte Sintering At 1300 Degrees Enc

The Properties of YSZ Electrolyte Sintering at 1300 °C

Impedance analysis of thin YSZ electrolyte for low-temperature solid oxide fuel cells

Analysis of the effect of ionic conductivity of electrolyte materials on the solid oxide fuel cell performance

High Performance Solid Oxide Fuel Cells Based on Tri-Layer Yttria-Stabilized Zirconia by Low Temperature Sintering Process

STABILITY OF SUB-MICRON SIZED CRYSTAL STRUCTURE YTTRIA STABILIZED ZIRCONIA ELECTROLYTE