Abstract:Yttria-stabilized zirconia (YSZ)/gadolinia-doped ceria (GDC) dual-layered electrolytes have promising potential in solid oxide fuel cells (SOFCs) to prevent the destroying reaction of the lanthanum-containing cathode with ZrO2 base electrolyte and improve ionic conduction by blocking ceria based electrolyte electronic conduction. Preparation of the YSZ/GDC electrolyte is problematic due to the formation of a high electrical resistance interdiffusion layer at high sintering temperatures. Flash sintering (FS) is a promising method for sintering materials at low temperatures and short times. Herein, FS is used to limit the interdiffusion layer. The green dual-layered electrolytes are prepared by YSZ tape casting and coating the GDC layer on the binder-burnout YSZ layer by wet spraying method. The effect of electric field strength (E) and current density (J) on the interdiffusion layer thickness is investigated by the response surface methodology (RSM). The interdiffusion layer thickness in the electrolytes is determined using elemental distribution curves across the YSZ/GDC interface using a scanning electron microscope (SEM) equipped with an energy-dispersive X-ray spectrometer (EDS). Response surface of interdiffusion layer thickness shows that the electric field strength is more effective in the interdiffusion layer propagation than the current density. By controlling the electric field strength and current density, the interdiffusion layer is limited and descends from 45 µm for E = 300 V/cm and J = 200 mA/mm2 to 1 µm for E = 80 V/cm and J = 200 mA/mm2 as the optimum FS parameters. Electrochemical impedance spectroscopy (EIS) results show improved electrical conduction in optimal flash sintered electrolytes compared with conventionally sintered ones due to the thinner interdiffusion layer. The SOFC single cell is made using the optimal flash sintered YSZ/GDC electrolyte, which shows a performance of 0.3 W/cm2 at 800 °C, about 15% higher than the SOFC single cell made by conventionally sintered YSZ/GDC electrolyte.

Interdiffusion between gadolinia doped ceria and yttria stabilized zirconia in solid oxide fuel cells: Experimental investigation and kinetic modeling

Performance of a double-layer CGO/YSZ electrolyte for solid oxide fuel cells

Controlling Yttria-stabilized zirconia/gadolinia-doped ceria interdiffusion layer in the solid oxide fuel cell electrolyte via flash sintering method

In Situ Densification of Gadolinium-Doped Ceria Interlayer by Infiltration Process in SOFC

Lower Down Both Ohmic and Cathode Polarization Resistances of Solid Oxide Fuel Cell Via Hydrothermal Modified Gadolinia Doped Ceria Barrier Layer

Preparation, Evaluation, and Application of SUS430/441 Interconnect with Mn-Co Coating in Solid Oxide Fuel Cells

On the role of the zirconia/ceria interface in the degradation of solid oxide electrolysis cells

Enhancing the performance of doped ceria interlayer for tubular solid oxide fuel cells

Sintering Composite Electrolytes of Yttria-Doped Bismuth Oxide and Yttria-Stabilized Zirconia for Solid Oxide Fuel Cells

Solid oxide fuel cell with a spin-coated yttria stabilized zirconia/gadolinia doped ceria bi-layer electrolyte

Specific Cation Diffusion across the (La,Sr)MnO3 (Ce,Gd)O2 interface in SOFCs

Performance and Stability Analysis of SOFC Containing Thin and Dense Gadolinium-Doped Ceria Interlayer Sintered at Low Temperature

A new in situ strategy to eliminate partial internal short circuit in Ce0.8Sm0.2O1.9-based solid oxide fuel cells

Coarse-grained molecular dynamics modeling and parameter analysis for sintered interface structures in sandwiched tri-layers reversible solid oxide fuel cell

Low Temperature Deposited (ce,gd)o2−x Interlayer for La0.6Sr0.4Co0.2Fe0.8O3 Cathode Based Solid Oxide Fuel Cell

Synthesis and Characterization of Gadolinium-Doped Zirconia as a Potential Electrolyte for Solid Oxide Fuel Cells

Effects of Co-Doped Barium Cerate Additive on Morphology, Conductivity and Electrochemical Properties of Samarium Doped Ceria Electrolyte for Intermediate Temperature Solid Oxide Fuel Cells

Preparation and mechanism of CeO2 interlayer in stabilized ZrO2-based SOFC

High Performance Gd3+ and Y3+ Co-Doped Ceria-Based Electrolytes for Intermediate Temperature Solid Oxide Fuel Cells

Synthesis and Characterization of (gd, Y)-Doped Ceria Electrolytes for Solid Oxide Fuel Cell

Influence of Zn-doping on low-temperature sintering ability and electrical conductivity of YCrO3-based ceramic interconnect materials