Abstract:Uncertainty in the figure of merit (FOM) parameters is a central feature of the best-estimate plus uncertainty (BEPU) method, which provides insight into the analysis margins not available from other analysis methods. The FOM uncertainty distributions are formed from propagation of the variations and uncertainty distributions in the operational and modeling parameters used in simulations of a design-basis accident (DBA) scenario for a nuclear power plant. To compute an accurate FOM uncertainty distribution, it is critical to accurately quantify and account for the input parameter prediction uncertainties. The coolant flow rate through fuel channels, or more precisely, the hydraulic resistance, including the impact of two-phase flow and its distribution in the primary heat transport system and the critical heat flux (CHF) of the fuel, are two key parameters for the limiting postulated accident scenarios in a CANDU reactor for various DBAs. Prediction uncertainty distributions for these parameters can be derived by directly validating code predictions against in-reactor measurements of flow rate and experimental measurements of CHF, respectively. Such code validation circumvents the convoluted and complex approach of decomposing computer models of physical phenomena into microscopic parameters, such as interfacial mass, momentum, and heat transfer correlations, and propagation of their uncertainty distributions to obtain an overall parameter uncertainty distribution of interest. Uncertainties associated with predictions of the coolant flow rate and CHF arise due to temporal and spatial variations and uncertainties in reactor conditions, limitations of physical models and their implementation in the codes, and in the case of CHF, measurement uncertainties associated with full-scale experiments. Careful assessment of key uncertainties, specifically their magnitudes, is important for ensuring uncertainty magnitudes are not unnecessarily over- or underestimated. These uncertainties also need to be characterized properly, e.g., whether uncertainties are common to a group of reactor fuel channels or vary independently for each fuel channel. Inadequate identification or incorrect classification or characterization of uncertainties would result in an inaccurate FOM uncertainty distribution. One important focus area for this study is the distinction between apparent prediction uncertainty (the difference between code prediction and measurement) and actual prediction uncertainty (the difference between code prediction and the true value). The actual code prediction uncertainty can be calculated from the apparent code uncertainty, provided there is adequate knowledge about the measurement uncertainty. The uncertainty models developed using this approach will be used as part of the BEPU analysis for slow loss-of–reactor power regulation accidents.

BEPU Analysis in LBLOCA Safety Review Calculation

BEPU Analyses for the Postulated Loss-of-cooling Accident Scenario in the Spent Fuel Pool at the Fukushima Daiichi Unit 4

Preliminary Study on Risk-informed LBLOCA of CPR1000 Nuclear Power Plant

Preliminary study on risk informed LBLOCA of CPR1000

Demonstration of the E-BEPU methodology for SL-LOCA in a Gen-III PWR reactor

Uncertainty and Sensitivity Analysis of SBLOCA Best-estimate Calculation

Application of uncertainty and sensitivity analysis in dose assessment during a postulated LBLOCA for VVER-1000 nuclear reactor

Best Estimate Plus Uncertainty Analysis of Station Blackout Transient in Pool-Type Research Reactor

Derivation of Uncertainty Distributions for Channel Flow Rate and Fuel Critical Heat Flux Predictions for Best-Estimate Plus Uncertainty Analysis of Slow Loss-of–Reactor Power Regulation Accidents in CANDU Stations

A Numerical Investigation of SBLOCA Scenario in Nuclear Heating Reactor

Research on Compliance Between Large Break LOCA of HPR1000 and New LOCA Acceptance Criterion 10Cfr50.46c

Estimation of uncertainty in computation of importance factors and probability of undesirable events for safety-critical multi-unit systems, based on Binary Decisions Diagrams

Uncertainty Analysis of Core Power Distribution Monitoring System SMROMS

The Sensitivity Analysis of Passive Containment Cooling System During Design Basis Accidents

The SCDAP/RELAP5 3.2 model of AP1000 on SBLOCA

Safety Analysis in VVER-1000 Due to Large-Break Loss-of-Coolant Accident and Station Blackout Transient Using RELAP5/SCDAPSIM/MOD3.5

Sensitivity Analysis of Stratification Entrainment Model of SCDAP/Relap5 3.2 Code

State-of-art review of beyond design basis evaluation approach of a generic nuclear power plant in the UK

Study on failure probability and fragility assessment of spent fuel pool for nuclear power plants under the beyond design basis earthquake

Loss of offsite power (LOOP) accident analysis by integration of deterministic and probabilistic approaches in Bushehr-1 VVER-1000/V446 nuclear power plant

Enhanced Stochastic Approaches of 1 : 4 PCCV in Nuclear Power Plant: Uncertainty Quantification and Fragility Assessment