Abstract:Core power distribution monitoring in operating power reactors is very important in core surveillance, the 3-D power distribution is one of the basic operation parameters which can determine many other important parameters used to evaluate the operation condition of reactor and the safe margin. Many kinds of on-line monitoring systems, such as BEACON [1] and SCOMS [2], have been developed to estimate in-core power distributions using fixed in-core detectors. In order to get the reliability of the estimated power distribution, the uncertainty analysis procedure of the monitoring system is needed. The uncertainty analysis method [ 1 ] of BEACON system includes a statistical simulation of various core state conditions, power distributions and detector behavior based on the measurement variability. A number of ‘true’ and ‘predicted’ core model pairs are selected to provide the uncertainty analysis with a bounding set of differences that could be encountered between the BEACON core monitor model and plant conditions under normal and off-normal conditions. The uncertainty analysis method used in SCOMS system [2] get the overall uncertainty from the uncertainties of the input parameters. Individual uncertainties of input variables are randomly sampled within the range and then added to the original value. In this study, a new uncertainty analysis method for core power distribution monitoring system SMROMS (Small Modular Reactor On-line Monitoring System) was discussed. SMROMS uses in-core self powered neutron detectors (SPNDs) to monitor the power distribution continuously. This method is different from two methods mentioned above, because the calculation uncertainty and measurement uncertainty are considered separately. A rod controlled small modular reactor developed by Nuclear Power Institute of China, i.e. ACP100-K, was selected as a study case. The 3DCC [3] (3D Coupling Coefficients) power distribution reconstruction method was implemented in SMROMS.

Uncertainty and Sensitivity Analysis of SBLOCA Best-estimate Calculation

A Numerical Investigation of SBLOCA Scenario in Nuclear Heating Reactor

The SCDAP/RELAP5 3.2 model of AP1000 on SBLOCA

Analyses of ACME integral test results on CAP1400 small-break loss-of-coolant-accident transient

Sensitivity Analysis of Stratification Entrainment Model of SCDAP/Relap5 3.2 Code

Application of uncertainty and sensitivity analysis in dose assessment during a postulated LBLOCA for VVER-1000 nuclear reactor

Numerical Simulation of AP1000 LBLOCA with SCDAP/RELAP 4.0 Code

THE CMT SIMULATION ON THE LARGE IMPASSIVE PWR WITH RELAP 5

A SIMULATION OF SMALL BREAK LOSS OF COOLANT ACCIDENT IN NUCLEAR HEATING REACTOR BASED ON RELAP5

Using an IIST SBLOCA Experiment to Assess RELAP5/MOD3.2

Preliminary study on risk informed LBLOCA of CPR1000

Multi-physics analysis of SBLOCA by coupled Neutronics/Thermal-Hydraulics full plant model

Preliminary Study on Risk-informed LBLOCA of CPR1000 Nuclear Power Plant

Scaling analysis of the Loop Seal Plugging and Clearing phenomena in a SB-LOCA transient on the BETHSY facility

Research on Compliance Between Large Break LOCA of HPR1000 and New LOCA Acceptance Criterion 10Cfr50.46c

Best Estimate Plus Uncertainty Analysis of Station Blackout Transient in Pool-Type Research Reactor

Pressure Reducing and Loss of Water under SBLOCA at Upper Plenum of Nuclear Heating Reactors

Uncertainty Analysis of Core Power Distribution Monitoring System SMROMS

Safety Analysis in VVER-1000 Due to Large-Break Loss-of-Coolant Accident and Station Blackout Transient Using RELAP5/SCDAPSIM/MOD3.5

Study on Release and Migration of Radionuclides under the Small Break Loss of Coolant Accident in a Marine Reactor

Simulation of Small-Break Loss-of-Coolant Accident Using the RELAP5 Code with an Improved Wall Drag Partition Model for Bubbly Flow