Abstract:Thermohydraulic analysis of postulated accidents will identify system responses to accident scenarios and aid in developing design of safety systems and strategies to prevent or mitigate accident propagation. This paper reports analyses of four accident scenarios of a fusion DEMO reactor based on water-cooled ceramic-pebble breeder blanket. The accidents analyzed, which were selected based on the previous logical accident analysis, are ex-vessel loss of coolant of the primary cooling system, in-vessel loss of coolant of the first wall (FW) cooling pipes, loss of coolant in blanket modules, and loss of vacuum. The analyses have identified thermohydraulic responses of the DEMO systems to these accidents, pressure loads to confinement barriers for radioactive materials. Effectiveness of the safety systems and the integrity of the primary and final (secondary) confinement barriers against the accidents are discussed. As for the final confinement barrier, we show for the first time that implementation of a pressure suppression system (PSS) to the cooling system vault and a vacuum breaker to the tokamak pit is effective in significantly keeping the integrity of the final confinement barrier against the ex-vessel loss-of-coolant and loss-of-vacuum accidents, respectively. As for the primary confinement barrier, we show for the first time that limitation of the number of blankets from which a helium purge gas line collects the bred tritium will be a key technical issue to prevent propagation of loss of coolant in a blanket box through the purge gas line and then suppress the pressurization of the vacuum vessel (VV). For the in-vessel loss of coolant of the FW cooling pipes, further optimization of the PSS or design solutions regarding in-vessel components and plasma control will be necessary to decrease the pressure load to the VV and ensure the integrity of the primary confinement barrier.

A Numerical Investigation of SBLOCA Scenario in Nuclear Heating Reactor

A SIMULATION OF SMALL BREAK LOSS OF COOLANT ACCIDENT IN NUCLEAR HEATING REACTOR BASED ON RELAP5

Pressure Reducing and Loss of Water under SBLOCA at Upper Plenum of Nuclear Heating Reactors

Numerical Simulation of AP1000 LBLOCA with SCDAP/RELAP 4.0 Code

Experimental simulation on LOCA of a nuclear heating reactor

Instability under flow break by nuclear heating reactor LOCA

Safety Analysis in VVER-1000 Due to Large-Break Loss-of-Coolant Accident and Station Blackout Transient Using RELAP5/SCDAPSIM/MOD3.5

Multi-physics analysis of SBLOCA by coupled Neutronics/Thermal-Hydraulics full plant model

Experimental study on flow break by nuclear heating reactor LOCA under shutting down incompletely

The SCDAP/RELAP5 3.2 model of AP1000 on SBLOCA

THE CMT SIMULATION ON THE LARGE IMPASSIVE PWR WITH RELAP 5

Uncertainty and Sensitivity Analysis of SBLOCA Best-estimate Calculation

Study on Release and Migration of Radionuclides under the Small Break Loss of Coolant Accident in a Marine Reactor

Simulation of VVER-1000 Guillotine Large Break Loss of Coolant Accident Using RELAP5/SCDAPSIM/MOD3.5

Simulation of Small-Break Loss-of-Coolant Accident Using the RELAP5 Code with an Improved Wall Drag Partition Model for Bubbly Flow

Numerical Study and Assessment of a Novel Combined Passive Cooling System for Tank-in-pool Reactors

Experimental Study of a Stoppage Natural Circulation During a Nuclear Heating Reactor LOCA

Experimental Study of the Transient Characteristics of A Natural Circulation Loop under Sbloca

Experimental Investigation of Early Initiation of Primary Cooldown by Secondary-Side Depressurization in A Pwr Inadequate Core-Cooling Accident

Thermohydraulic Analysis of Accident Scenarios of a Fusion DEMO Reactor Based on Water-Cooled Ceramic Breeder Blanket: Analysis of LOCAs and LOVA

Early Mitigation Measures for High Flux Reactor Loss-of-Coolant Accidents