Abstract:After the severe accident at Fukushima, the importance of BWR design and related structures and their contribution to the severe accident progression has increased. Fuel channel boxes, absorber crosses, water rods, and smaller primary containment design of the BWR have been considered in the ASTEC code to increase the knowledge of BWR design and associated models. The previously developed ASTEC model for Peach Bottom Unit -2 was updated to include modern GE14 10x10 fuel assemblies with realistic fission product inventories. The CASMO5 code predicted the fission product inventory and burnup for GE14 10x10 fuel assemblies based on real plant data obtained from the ENRESA samples. First, a Short -Term Station Blackout (ST-SBO) analysis was performed to compare the impact of the old and new fuel assembly designs on the accident progression and radiological consequences. Second, a short-term station blackout with a stuck open safety relief valve (ST-SBO SOSRV) was considered for modern fuel assemblies. The actuation of the safety valve resulted in a much lower corium ejection and a longer transient to basemat failure in the cavity. The scatter of corium ejection amounts between the considered scenarios showed the importance of the design of the bottom head and the penetration points in BWRs. In both cases, failure of the drywell head flange and release of radionuclides to the environment occurred. Higher burnup and radionuclide inventory in the 10x10 assemblies resulted in a larger release compared to the previous design. Radiological analysis using JRODOS was performed for both cases and the maximum total effective gamma dose rate was estimated to be 67.89 mSv/h and 119.46 mSv/h for ST-SBO and ST-SBO SOSRV, respectively. The statistical analysis and the number of records in the considered cities around the Peach Bottom Plant showed the distribution over the region and the risk factors of the populated cities. The collaborative use of three codes in this study allows users to identify the fission product inventory with CASMO5 and investigation of the severe accident scenario with ASTEC and identifying radiological impact of the released radioactive isotopes to the environment with JRODOS code.

Best Estimate Plus Uncertainty Analysis of Station Blackout Transient in Pool-Type Research Reactor

Best Estimate Plus Uncertainty Analysis of the China Advanced Large-Scale PWR During LBLOCA Scenarios

Numerical Study and Assessment of a Novel Combined Passive Cooling System for Tank-in-pool Reactors

Safety Analysis in VVER-1000 Due to Large-Break Loss-of-Coolant Accident and Station Blackout Transient Using RELAP5/SCDAPSIM/MOD3.5

Simulation of the Small Modular Reactor Severe Accident Scenario Response to Sbo Using Melcor Code

Optimization of Sensitivity Analysis in Best Estimate Plus Uncertainty and the Application to Large Break LOCA of a Three-Loop Pressurized Water Reactor

Study of Decay Heat Removal Approach for Advanced Passive PWR During Station Blackout

Phenomena Identification and Ranking Table of Station Blackout Accidents for China Sodium Cooled Fast Reactor

BEPU Analysis in LBLOCA Safety Review Calculation

Analysis of the Short Term-Station Blackout Accident at the Peach Bottom Unit-2 Reactor with ASTEC Including the Estimation of the Radiological Impact with JRODOS

Best Estimate Plus Uncertainty Analysis of Small Break Loss of Coolant Accidents with Different Break Sizes for CPR1000

BEPU Analyses for the Postulated Loss-of-cooling Accident Scenario in the Spent Fuel Pool at the Fukushima Daiichi Unit 4

A Numerical Investigation of SBLOCA Scenario in Nuclear Heating Reactor

Investigation On Risk-Informed Uncertainty Method And Its Application In Pwr Lbloca

Accident Analysis of Station Blackout for China Advanced Research Reactor with Shutdown Failure

A SIMULATION OF SMALL BREAK LOSS OF COOLANT ACCIDENT IN NUCLEAR HEATING REACTOR BASED ON RELAP5

THE CMT SIMULATION ON THE LARGE IMPASSIVE PWR WITH RELAP 5

Uncertainty and Sensitivity Analysis of In-Vessel Phenomena under Severe Accident Mitigation Strategy Based on ISAA-SAUP Program

Relap5/Mod3 Simulation of the Station Blackout Experiment Conducted at the Iist Facility

Transient Thermal Behaviors of SBO Accident for a 200MW OFNP under Heaving Motion Conditions

Transient Analyses of Station Blackout Accident for CPR1000