Abstract:Probabilistic evaluation of the internal pressure capacity before excessive leakage is essential for ensuring preemptive response in case of a severe accident in a prestressed concrete containment vessel (PCCV) subjected to internal pressure in a nuclear power plant. Therefore, in this study, we conducted a fragility analysis to evaluate the probabilistic internal pressure capacity for damage states before excessive leakage. Three damage states were classified, and a finite element (FE) model was developed based on the experimental test results of a 1 : 4 scale PCCV under the overpressurization condition at Sandia National Laboratory. The three damage states were determined as the onset of inelastic behavior (DS1), onset of leakage (DS2), and excessive leakage (DS3). Fragility analysis was performed using a validated FE model to consider uncertainties in material properties and prestressing force. The Latin hypercube sampling method was used to perform uncertainty quantification, and normality tests verified that the samples exhibited normal distributions. The internal pressure capacity variability in DS1 and DS2 was higher than that in DS3. DS1 is the point at which the compressive deformation caused by the prestressing force was converted into tensile deformation because of the increase in the internal pressure, which resulted in tensile concrete cracking. Furthermore, DS2 is the state in which localized damage of the liner occurred and cracks in the concrete spread. Thus, the internal pressure capacity for DS1 and DS2 exhibited high variability because of the uncertainty of the prestressing force and material properties. Moreover, the median capabilities of DS1, DS2, and DS3 were ~1.85, 2.61, and 3.45 times the design pressure, respectively. Therefore, material and structural uncertainties in nuclear power plants should be appropriately considered, and a conservative assessment of the damage state before excessive leakage should be performed for preemptive response in the case of severe accidents.

Study on failure probability and fragility assessment of spent fuel pool for nuclear power plants under the beyond design basis earthquake

Demonstration of Structural Integrity of Boiling Water Reactor Pressure Vessels under Ultimate Response Guideline Operation

The Plant-specific Spent Fuel Pool Severe Accident Analysis to Support a SFP Risk and Accident Management

Enhanced Stochastic Approaches of 1 : 4 PCCV in Nuclear Power Plant: Uncertainty Quantification and Fragility Assessment

Effects of Chemical Content Variation on the Fracture Probability of PWR Pressure Vessel Subjected to PTS Events

The Design and CFD Simulation of a New Spent Fuel Pool Passive Cooling System

Failure Probability Of Degraded Pipes Based On Probabilistic Fracture Mechanics For Seismic Safety Margin Assessment On Npp

Study on the Structural Evaluation and Optimization of Spent Nuclear Fuel Cask

The design and simulation of a new spent fuel pool passive cooling system

Application of Flaw Updating Process on Probabilistic Integrity Analysis for a Reactor Pressure Vessel Subjected to Pressurized Thermal Shocks

Failure Probability Analysis of Aged Piping Using Probabilistic Fracture Mechanics Methodology Considering Seismic Loads

Benchmarking Study on Probabilistic Fracture Mechanics Analysis Codes Xlpr and PASCAL-SP Considering Primary Water Stress Corrosion Cracking

Development of 3-D CFD Methodology to Investigate the Transient Thermal-Hydraulic Characteristics of Coolant in a Spent Fuel Pool

Application Of Flaw Updating Process On Probabilistic Structural Evaluation For A Reactor Pressure Vessel Under Pressurized Thermal Shocks

Application Of Probabilistic Fracture Mechanics Methodology For Japanese Reactor Pressure Vessels Using Pascal4

Study on spent fuel heatup during spent fuel pool complete loss of coolant accident

The Influence of Chemistry Concentration on the Fracture Risk of a Reactor Pressure Vessel Subjected to Pressurized Thermal Shocks

Application of Probabilistic Fracture Mechanics to Reactor Pressure Vessel Using PASCAL4 Code

Large Thermal Gradients on Structural Integrity of a Reactor Pressure Vessel Subjected to Pressurized Thermal Shocks

Seismic fragility analysis of nuclear power plants considering structural parameter uncertainty

Verification of Probabilistic Fracture Mechanics Analysis Code for Reactor Pressure Vessel