Abstract:Following unprecedented Fukushima Daiichi severe accident, which significantly amplify the production of hydrogen and the associated risk of explosions, particularly in accidents like station blackout (SBO) that jeopardize containment integrity and reactor safety, a thorough investigation and comprehension of the phenomenon known as high-pressure melt ejection (HPME) are necessary. This study examines how the SBO accident develops without operator intervention or access to emergency diesel generators through full nuclear power plant simulation, including containment, core, primary, and secondary circuits. Accurate time step selection is crucial for the simulation to produce reliable results for high-pressure melt ejection processes. While the process is faster and easier under Low Pressure Melt Ejection (LPME) conditions, time step tuning can significantly lengthen the (HPME) simulation (approximately one month for each scenario). After thorough examinations and analysis of various simulation findings, three cases were evaluated for the ex-vessel phase, illustrating the most likely scenarios of high-pressure molten material splashing into the cavity. The findings demonstrate that during the in-vessel phase, 578 kg of hydrogen is created. Additionally, during the ex-vessel phase, there is a significant increase in the containment's temperature and pressure due to the high-temperature hydrogen and significant water and steam leakage. The temperature and pressure inside the containment rise well above the safety criteria due to the leakage of 1529 kg of hydrogen from the cavity and lead to hydrogen explosion due to MELCOR message. The calculated amount of hydrogen gas is within the explosion limit range of 18.3% to 59% of the containment atmospheric pressure volume. Moreover, the height and diameter of the cavity alter due to the direct heating and corrosion of the cavity walls, ultimately compromising the integrity of the plant in the alpha mode. Based on the results obtained, it can be seen that if a large portion of the molten material is deposited on the concrete surface (case III) instead of dispersed in the cavity atmosphere (case I), the rate of hydrogen production and therefore the total amount of hydrogen (and its related energy) produced will be increased and could lead to deflagration to detonation situation.

Loss of offsite power (LOOP) accident analysis by integration of deterministic and probabilistic approaches in Bushehr-1 VVER-1000/V446 nuclear power plant

Application of uncertainty and sensitivity analysis in dose assessment during a postulated LBLOCA for VVER-1000 nuclear reactor

Multi-physics analysis of SBLOCA by coupled Neutronics/Thermal-Hydraulics full plant model

Safety Analysis in VVER-1000 Due to Large-Break Loss-of-Coolant Accident and Station Blackout Transient Using RELAP5/SCDAPSIM/MOD3.5

Re-assessment of accumulators performance to identify VVER-1000 vulnerabilities against various break sizes of SB-LOCA along with SBO

A Numerical Investigation of SBLOCA Scenario in Nuclear Heating Reactor

Analysis of loss of cooling and loss of coolant severe accident scenarios in VVER-1000/V446 spent fuel pool

External Event Risk Assessment: Methodology and Application

Modeling interconnections of safety and financial performance of nuclear power plants, part 3: Spatiotemporal probabilistic physics-of-failure analysis and its connection to safety and financial performance

Quantifying the impact of risk mitigation measures using SPAR-H and RCM Approaches: Case study based on VVER-1000 systems

Analysis of Loss of Vacuum Accident at ITER using SOCRAT-V1/V2

Safety Analysis of Loss of NPP Off-Site Power with Failure of Reactor SCRAM (ATWS) for VVER-1000

Preliminary accident analysis of the loss of vacuum in vacuum vessel for the European DEMO HCPB blanket concept

Safety, health, and environmental risk assessment of the aromatic outlet of Imam Khomeini Petrochemical Company using LOPA and fuzzy-LOPA and pollutants and control actions using the Bow-tie method

A mechanistic model of a PWR-based nuclear power plant in response to external hazard-induced station blackout accidents

Fault Propagation and Effects Analysis for Designing an Online Monitoring System for the Secondary Loop of the Nuclear Power Plant Portion of a Hybrid Energy System

High-pressure core meltdown and hydrogen generation during In-vessel and Ex-vessel phases of VVER-1000 nuclear reactor and effect of heat structures

BEPU Analyses for the Postulated Loss-of-cooling Accident Scenario in the Spent Fuel Pool at the Fukushima Daiichi Unit 4

LOFA and LOUHS analysis on the energy well SMR using TRACE code

Simulation of VVER-1000 Guillotine Large Break Loss of Coolant Accident Using RELAP5/SCDAPSIM/MOD3.5

Preliminary study on risk informed LBLOCA of CPR1000