Abstract:A novel one-step liquid plasma-assisted particle deposition and sintering (LPDS) method is used to prepare a ZrC–ZrO2 nanocomposite ceramic coating on a TiAlNb medium-entropy alloy to enhance its ablation resistance. For comparison, a conventional plasma electrolytic oxidation (PEO) ceramic coating is fabricated on a substrate without ZrC particles. Results show that numerous ZrC particles are introduced into the coating, accompanied by partial oxidation to ZrO2 during the LPDS. The thickness of the nanocomposite coating increases significantly by approximately 11.4 times compared with that of the PEO coating. At 1000 °C, the ablation thickening of the ZrC–ZrO2 nanocomposite coating is approximately 1/4 of that of the substrate after ablation in air. Moreover, 17.88% and 2.83% of the substrate surface and PEO coating are peeled, respectively, whereas no peeling occurred in the ZrC–ZrO2 nanocomposite coating. This can be attributed to the high melting point and exceptional toughness of ZrO2, which allow it to absorb the stress caused by thermal shocks and inhibit crack formation. A thick nanocomposite coating is crucial for protecting the substrate by preventing oxygen from permeating the coating and oxidizing the substrate. Additionally, the glass phase of SiO2 densifies the pores and cracks in the coating, thereby significantly inhibiting the inward diffusion of oxygen and preventing ablation. Therefore, LPDS is a novel strategy for designing and fabricating multifunctional coatings to enhance the thermal protection of alloy substrates via the incorporation of various functional particles.

Nanosized (zr, Hf)O2 Coating Reinforced by AlN Whiskers for the Ablation Protection of SiC Coated C/C Composites

UHTC coating reinforced by HfC nanowires against ablation for C/C composites

Preparation and ablation resistance of ZrC nanowires-reinforced CVD-ZrC coating on sharp leading edge C/C composites

Ablation behavior of ZrC-SiHfOC-MoSi 2 coating for carbon/carbon composites under Ar-O 2 plasma flame

Ablation resistance of SiC-modified nanocomposite ceramic coating prepared by LPDS method on titanium alloy

Effect of Si, Al2O3 additives on the ablation behavior of ZrB2-SiC coating with Al2O3-modified SiC bond coat for C/C composites

Ablation mechanism and morphology evolution of the HfC-SiC coating for C/C composites deposited by supersonic atmospheric plasma spraying

Microstructures and ablation resistance of WSi2/ZrSi2/ZrxHf1-xC/SiC coating based on a pattern strengthening one-step method

Enhanced ablation resistance of ZrC–ZrO2 nanocomposite ceramic coating on TiAlNb medium-entropy alloy prepared by a novel strategy

Ablation behavior and mechanism of SiCnw modified SiC-ZrC coating for graphite under a plasma ablation flame

Ablation behavior and mechanisms of ZrC-SiC-MoSi2 coated C/C-SiC-ZrC ceramic matrix composites under oxyacetylene torch

Ablation behavior of C/C–Zr1-xHfxC-SiC composites under an oxyacetylene flame at above 2500 °C

Effect of temperature-dependent nano SiC on the ablation resistance of ZrC coating

Ablation behaviour of the CVD-(ZrC/SiC)3 alternate coating on C/C composites under oxyacetylene torch with different heat fluxes

Effects of SiO 2 -coated CNTs on the directional formation of SiC whiskers and improvement in the ablative resistance of polymer-matrix composites

Using in-situ conversed nano SiC to bond UHTC particles and construct anti-ablation coating

Microstructure and Ablation Performance of SiC–ZrC Coated C/C Composites Prepared by Reactive Melt Infiltration

Phase and microstructure evolutions of in-situ ZrC composite coating under plasma torch ablation

Ablation resistance and mechanism of niobium carbide coatings fabricated by plasma spraying

WSi2 modified HfB2-SiC coating: Microstructure and ablation resistance

Effect of SiCnws@BN core shell upon impact-ablation performance of HfC coating on C/C composites