Abstract:Tube overheating is the leading cause of boiler tube failures that had led to tremendous replacement and maintenance costs. Boiler tube temperature is simultaneously affected by the heating effect of hot combustion gas in the furnace and the cooling effect of steam flow in boiler tubes. Thus, prediction of tube temperature needs to include the simulations of both the gas and steam flows of the boiler in the model. To compromise the significant scale difference between the boiler furnace and tubes, a coupled model that integrates a three-dimensional (3D) CFD model describing the gas flow and combustion processes in the furnace with a one-dimensional (1D) hydrodynamic model describing the steam flow in the boiler waterwall tubes was developed in this paper. The 3D CFD and 1D hydrodynamic models are coupled by iterative data exchange of boiler heat flux and steam temperature between the two models. In this way, this coupled model can incorporate all the key parameters that strongly affect the waterwall tube temperature, including the distributions of boiler heat flux, steam temperature and the convective heat transfer coefficient of steam flow in boiler tubes. In particular, the critical effects of steam maldistribution caused by both the structure of tube network system and uneven heat absorption of parallel tubes on tube temperature can be resolved by this model. This coupled model provides the capability to predict the detailed distribution of waterwall tube temperature and locate the areas of tube overheating under different boiler operating parameters. This coupled model was employed to predict the tube temperature distribution of the spiral waterwall of a 350 MW supercritical boiler. The predicted results show that the areas having higher risk of tube overheating are located near the outlet of spiral waterwall tubes where the steam temperature is the highest and on the wall areas where the local wall heat flux is the highest. The results strengthen the necessity of incorporating both the gas and steam sides of boiler into the model for accurate prediction of waterwall tube temperature.

Analysis and Referential Significance of a Breakdown Accident of the Main Feed Water Pump in a 350 MW Supercritical CFB Boiler

Safety Analysis on the Water Wall in the 350 MW Supercritical CFB Boiler under Sudden Electricity Failure

Safety Analysis on the Heating Surfaces in the 660 MW Ultra-Supercritical CFB Boiler under Sudden Electricity Failure

Analysis of Superheater’s Pipe Wall Overtemperature by Fault Tree Diagnose

Thermal–Hydraulic Calculation and Analysis on Water Wall System of a 700 MWe Ultra-Supercritical CFB Boiler

The hydrodynamic characteristics of embattlement shaped water wall of a 350 mw supercritical circulating fluidized bed boiler

Heat Transfer Analysis of Stationary Bed Materials in a CFB Boiler after a Sudden Power Failure

Thermodynamic Analysis of a 660 MW Ultra-Supercritical CFB Boiler Unit

Restart-up Performance of a CFB Boiler after a Sudden Power Failure Accident

Safety analysis of operation of water walls of a 300 MW once-through boiler in peak load operation

Structure and Performance of a 600MWe Supercritical CFB Boiler with Water Cooled Panels

Development and validation of a dynamic flowsheet model for a 350 MWe supercritical circulating fluidized bed boiler

Steam Temperature Characteristics in Boiler Water Wall Tubes Based on Furnace CFD and Hydrodynamic Coupling Model

Failure Analysis on Circulating Water Pump of Duplex Stainless Steel in 1000 MW Ultra-Supercritical Thermal Power Unit

Design and Research on a 600MWe Supercritical Circulating Fluidized Bed Boiler

A coupled combustion and hydrodynamic model for the prediction of waterwall tube overheating of supercritical boiler

Research on the Water Wall Design and Hydrodynamic Characteristics of a 600 MW Supercritical Pressure CFB Boiler

The Water Dynamic Safety Of Cfb Boiler With Water Cooled Square Cyclone

Analysis of the Accelerator-Driven System Fuel Assembly during the Steam Generator Tube Rupture Accident

Numerical investigation of cooling ability in heat-generating porous debris bed after severe accident in PWR

Thermal-hydraulic Calculation and Analysis on Evaporator System of a 660 MWe Ultra-Supercritical CFB Boiler