Abstract:A porous debris bed formed after a severe accident is a structure composed of different sized particles. Due to the fission reaction in the debris bed, decay heat is continuously released. Therefore, the cooling ability should be investigated to determine the safety of the debris bed. In this paper, two-phase conservation equations with closure correlations are proposed for the boiling phenomenon inside the pool. For the flow resistance, the drag force between the gas and liquid in the continuous fluid is considered as well as the flow resistance of the solid to fluid in the porous medium area. The heat transfer model takes into account the heat transfer between solid phase and fluid phases as well as the heat and mass transfer between gas and liquid. All calculations are conducted based on the CFD method, and the related models are written into the CFD calculation program in the form of a User Defined Function (UDF). After the necessary validation of the proposed correlations, the analysis and discussion are based on the effect of the heating type, the non-uniform distribution of structural parameters, and the shape of the geometry. The results show the key effect of natural convection between the different boundary settings of the heating type. The time series of strong natural convection formation and the decay power of heat are the factors that are determined for the position of the boiling crisis. In addition, the limited power density is determined by the top half of the debris bed. The increase in structural parameters and operating pressure leads to a better cooling ability. For the shape of the debris bed, a regular cylinder is a better structure for heat removal, while the conical shape significantly reduces the limited power density, which is dangerous for the long-term cooling of the debris bed. The cooling ability would be improved if a downcomer existed in the porous debris bed. These three research parts are conducive to deepening the understanding of the process of a serious accident.

Heat Transfer Analysis of Stationary Bed Materials in a CFB Boiler after a Sudden Power Failure

Restart-up Performance of a CFB Boiler after a Sudden Power Failure Accident

Safety Analysis on the Heating Surfaces in the 660 MW Ultra-Supercritical CFB Boiler under Sudden Electricity Failure

Safety Analysis on the Water Wall in the 350 MW Supercritical CFB Boiler under Sudden Electricity Failure

Analysis and Referential Significance of a Breakdown Accident of the Main Feed Water Pump in a 350 MW Supercritical CFB Boiler

Heat transfer and protection of high-temperature reheater of a 660 MW circulating fluidized bed boiler after black out

Factors Affecting the Heat Transfer in a Circulating Fluidized Bed Boiler

Measurement of Heat Transfer in a 465t/h Circulating Fluidized Bed Boiler

The Heat Transfer Coefficients of the Heating Surface of 300 MWe CFB Boiler

Heat Flux Distribution on Circulating Fluidized Bed Boiler Water Wall

Study on Dynamic Behavior of the Combustion System of a Circulating Fluidized Bed Boiler

Heat flux profile of the furnace wall of a 300MWe CFB boiler

The hydrodynamic characteristics of embattlement shaped water wall of a 350 mw supercritical circulating fluidized bed boiler

Heat Transfer Coefficient Distribution in the Furnace of a 300MWe CFB Boiler

Heat transfer characteristics of fluidized bed heat exchanger in a 300MW CFB boiler

Dynamic Simulation of MFT and BT Processes on a 660 MW Ultra-Supercritical Circulating Fluidized Bed Boiler

Heat Transfer in a Large-Scale Circulating Fluidized Bed Boiler

Thermal Inertia of 330 MW Circulating Fluidized Bed Boiler during Load Change

Steam and Water Wall Temperature of a 600mwe Supercritical Pressure Circulating Fluidized Bed Boiler

Study on Dynamic Characteristics of Residual Char of CFB Boiler Based on CPFD Method

Numerical investigation of cooling ability in heat-generating porous debris bed after severe accident in PWR