Abstract:The opposed wall-fired boiler is widely used in Chinese power plants due to its adaptability. However, deviations from design conditions can cause the reduction of combustion efficiency and combustion stability, and the overheating of heating surfaces. This study conducted numerical simulations on a 600 MW supercritical opposed wall-fired boiler at 75%, 50%, and 30% Turbine Heat Acceptance (THA) load conditions. The variation of temperature field and heat flux in the furnace under different loads, and parameters such as distributions of heat flux, temperature, and the stress of the high-temperature heating surface are analyzed. Results indicate that reducing the load from 75% to 30% THA lowers the furnace outlet temperature from 1158 to 1009 K and reduces the average gas temperature of the high-temperature heating surface from 1800 to 1570 K. Under a high load, the maximum heat flux concentrates on the side water-cooled wall of the combustion zone. However, when the load decreases, the heat absorption shifts towards the main combustion zone. Furthermore, under a high load, the average wall temperature of the high-temperature heating surface remains at 1600 K with a uniform temperature distribution. In contrast, when the load drops to 30% THA, significant temperature differences appear on the heating surface, with a maximum difference of 400 K. This leads to excessive expansion and slagging on the high-temperature heating surface, particularly in the middle and lower sections, due to the increased stress. These findings offer valuable insights for optimizing the combustion characteristics of opposed wall-fired boilers and preventing overtemperature explosions on the platen heating surface.

Heat transfer and protection of high-temperature reheater of a 660 MW circulating fluidized bed boiler after black out

Safety Analysis on the Heating Surfaces in the 660 MW Ultra-Supercritical CFB Boiler under Sudden Electricity Failure

Study on coal combustion characteristics in a 350MW supercritical tangentially boiler

Heat Transfer Analysis of Stationary Bed Materials in a CFB Boiler after a Sudden Power Failure

Heat transfer in a 600 Mwe supercritical circulating fluidized bed boiler with water cooled wall panels

Heat Transfer in Furnace of 1 000 MW Coal-fired Unit under Different Load Conditions

Experiment and Investigation of Overheating Problem of 300MW Boiler's HT Reheater

Investigation on the Heat Transfer Model of the External Heat Exchanger of Circulating Fluidized Bed Boilers

The Heat Transfer Coefficients of the Heating Surface of 300 MWe CFB Boiler

Investigation on slagging and high-temperature corrosion prevention and control of a 1000 MW ultra supercritical double tangentially fired boiler

Study And Design Of Platen Superheater Of 300 Mw Cfb Boiler

Effects of flue gas recirculation on combustion and heat flux distribution in 660 MW double-reheat tower-type boiler

Restart-up Performance of a CFB Boiler after a Sudden Power Failure Accident

Failure analysis of reheater tubes in a 350 MW supercritical circulating fluidized bed boiler

Research on the Water Wall Design and Hydrodynamic Characteristics of a 600 MW Supercritical Pressure CFB Boiler

Research on the Heat Transfer Model of Platen Heating Surface of 300 Mw Circulating Fluidized Bed Boilers

Heat Flux Distribution on Circulating Fluidized Bed Boiler Water Wall

Design and Operation of Experimental System for Studying Heat Transfer in a Smooth Tube at Near and Super Critical Pressure

Numerical Study of Supercritical Opposed Wall-Fired Boiler Furnace Temperature and High-Temperature Heating Surface Stress under Variable Load Operation

Heat Flux Determination Based on the Waterwall and Gas–solid Flow in a Supercritical CFB Boiler

Thermal–Hydraulic Calculation and Analysis on Water Wall System of a 700 MWe Ultra-Supercritical CFB Boiler